82
TO ORDER CALL 1-888-9-AIMTEC
AM20E-C Series
20 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
SYNCHRONOUS RECTIFIER TOPOLOGY
SURFACE MOUNT TECHNOLOGY
STANDARD 2”x1” PACKAGE AND PINOUT
REMOTE ON/OFF CONTROL ( OPTIONAL)
GENERAL DESCRIPTION
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Our AM20E-C series is a family of cost effective 20Wsingle output
DC-DC converters. These converters are shielded on all six sides and
encapsulated with a nickel-coated copper with a non-conductive base
and dimensions of 50.8x25.4x10.5mm. The high performance features
of our AM20E-C components include short circuit protection with cur-
rent limit auto recovery, tight line regulation and a high efficiency
operation coefficient up to 88%.
Six models operate from an input voltage range of 24 &
48VDC then converts it into output voltages of 2.5, 3,3 &
5VDC. The normal operation is specified over the full
operating temperature range of -25°C to +71°C with no
derating required. Cooling is done by free air convection.
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25oC)
Specifications are subject to change without notification
Isolation Specifications:
Rated voltage
Resistance
Capacitance
1500VDC
>1000 Mohms
1000pF
Output Specifications:
Voltage accuracy
Ripple
Noise
Short circuit protection
Over current protection
±2%
<0.2% Vout +20mVmax (Vp-p)
<0.5% Vout +50mVmax (Vp-p)
Current limit, auto-recovery
Works over 120% of rating
and recovers automatically
Zener diode clamp protection
Over voltage protection
Line regulation (HL-LL) ±0.5%(typ.)
Load regulation (10-100%) ±1%(typ.)
Temperature coefficient
±0.02%/°C
Input Specifications:
Voltage range
24VDC, 18~36VDC
48 VDC, 36~75VDC
p
(Pi) Network
Filter
Environmental Specifications:
Operating temperature
Storage temperature
Case temperature
Humidity (non-condensing)
Cooling
-25°C …+71°C
-55°C …+105°C
+95°C, max.
Up to 95%
Free-air convection
Physical Specifications:
Dimensions
50.8x25.4x10.5mm,
2.0x1.0x0.413inches
32g
Nickel-Coated Copper
with Non-Conductive base,
six sides’ shielded
Weight
Case material
General Specifications:
Efficiency
Switching frequency
85% to 88%
400KHz, typ. 100% load
D
Continued on next page