參數資料
型號： AM29BDD160GB64CKK
廠商： ADVANCED MICRO DEVICES INC
元件分類： PROM
英文描述： 16 Megabit (1 M x 16-bit/512 K x 32-Bit), CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory
中文描述： 512K X 32 FLASH 2.7V PROM, 64 ns, PQFP80
封裝： LEAD FREE, PLASTIC, QFP-80
文件頁數： 46/80頁
文件大?。?/td> 3476K
代理商： AM29BDD160GB64CKK
48
Am29BDD160G
(except where BA is required) and data bits higher than
DQ7 are don’t cares.
5. No unlock or command cycles required when bank is
reading array data.
6. The Reset command is required to return to the read
mode (or to the erase-suspend-read mode if previously
in Erase Suspend) when a bank is in the autoselect
mode, or if DQ5 goes high (while the bank is providing
status information).
7. The fourth cycle of the autoselect command sequence is
a read cycle. The system must provide the bank address
to obtain the manufacturer ID or device ID information.
See the Autoselect Command section for more informa-
tion.
8. This command cannot be executed until The Unlock By-
pass command must be executed before writing this
command sequence. The Unlock Bypass Reset command
must be executed to return to normal operation.
9. This command is ignored during any embedded pro-
gram, erase or suspended operation.
10. Valid read operations include asynchronous and burst
read mode operations.
11. The device ID must be read across the fourth, fifth, and
sixth cycles. 00h in the sixth cycle indicates top boot
block, 01h indicates bottom boot block.
12. The system may read and program in non-erasing sec-
tors, or enter the autoselect mode, when in the Pro-
gram/Erase Suspend mode. The Program/Erase
Suspend command is valid only during a sector erase
operation, and requires the bank address.
13. The Program/Erase Resume command is valid only dur-
ing the Erase Suspend mode, and requires the bank ad-
dress.
14. Command is valid when device is ready to read array
data or when device is in autoselect mode.
15. Asynchronous read operations.
16. ACC must be at VID during the entire operation of this com-
mand.
17. Command is ignored during any Embedded Program,
Embedded Erase, or Suspend operation.
18. The Unlock Bypass Entry command is required prior to
any Unlock Bypass operation. The Unlock Bypass Reset
command is required to return to the read mode.
相關PDF資料
PDF描述
AM29BDD160GB65APBE 16 Megabit (1 M x 16-bit/512 K x 32-Bit), CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory
AM29BDD160GB65APBI 16 Megabit (1 M x 16-bit/512 K x 32-Bit), CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory
AM29BDD160GT54DKE 16 Megabit (1 M x 16-bit/512 K x 32-Bit), CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory
AM29BDD160GT54DKF 16 Megabit (1 M x 16-bit/512 K x 32-Bit), CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory
AM29BDD160GT54DKI 16 Megabit (1 M x 16-bit/512 K x 32-Bit), CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory
相關代理商/技術參數
參數描述
AM29BDS128HE9VKI 制造商:Advanced Micro Devices 功能描述:Flash Mem Parallel/Serial 1.8V 128M-Bit 8M x 16 50ns 80-Pin FBGA
AM29BDS643GT5KVAI 制造商:Spansion 功能描述:FLASH PARALLEL 1.8V 64MBIT 4MX16 55NS 44FBGA - Trays
AM29BL802CB-65RZET 制造商:Spansion 功能描述:
AM29C01WW WAF 制造商:Advanced Micro Devices 功能描述:
AM29C10API 制造商:Rochester Electronics LLC 功能描述:- Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*