AN8746SA
ICs for Compact Disc/CD-ROM Player
4
I
Electrical Characteristics at V
C
=
2.4 V, V
M12
=
V
M34
=
2.4 V, V
GI
=
7.0 V, AC
=
PC
=
2.4 V, R
L
=
8
,
T
a
=
25
°
C (continued)
Design reference data
Note) The characteristics listed below are theoretical values based on the IC design and are not guaranteed.
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
Thermal protection
Thermal protection operating
temperature
T
THD
145
°
C
Thermal protection hysteresis
width
T
THD
20
°
C
I
Usage Notes
1. Care should be taken so as not to cause any of the following conditions on use of this IC. If the following conditions
come up, the IC is likely to break down or to be smoking.
Short-circuit between output pins
Short-circuit between output pin and GND
Short-circuit between output pin and power supply
(Output pin refers to any of those Fo1 (pin 8), Ro1 (pin 6), Fo2 (pin 9), Ro2 (pin 11), Fo3 (pin 24), Ro3 (pin 22),
Fo4 (pin 25), Ro4 (pin 27). GND refers to any of those GND (pin 14), PGND1 (pin 7), PGND2 (pin 10), PGND3
(pin 23), PGND4 (pin 26). Power supply refers to any of those V
C
(pin 2), V
GI
(pin 19), V
M1
(pin 1), V
M2
(pin16),
V
M3
(pin 17), V
M4
(pin 32).
2. V
M1
monitor pin (pin 3) outputs approximately one half of V
M1
voltage and its upper limit is V
C
supply voltage. This
is meant to prevent the DSP connected to this Pin from damage when the voltage exceeding an operating supply
voltage range is inputted to the V
M1
pin. On use of this pin, therefore, note that no value exceeding V
C
is outputted.
I
Application Notes
1. P
D
T
a
curves of SSOP032-P-0300
P
D
T
a
P
D
Ambient temperature
T
a
(
°
C)
0.000
0
25
50
75
100
125
150
1.400
1.288
1.200
1.000
0.800
0.667
0.600
0.400
0.200
Independent IC
without a heat sink
R
th(j-a)
=
187.2
°
C/W
Mounted on standard board
(glass epoxy:
50 mm
×
50 mm
×
t
0.8 mm)
R
th(j-a)
=
97.0
°
C/W