- 您現在的位置：買賣IC網 > PDF目錄298846 > AXW3201431A 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET PDF資料下載
參數資料
| 型號： | AXW3201431A |
| 元件分類： | 電信和以太網連接器 |
| 英文描述： | 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| 封裝： | ROHS COMPLIANT |
| 文件頁數： | 10/10頁 |
| 文件大?。?/td> | 399K |
| 代理商： | AXW3201431A |
Connectors
for
industrial
equipment
AXW
NOTES
4) Contacts (5 in line)
26
16.7
5.08
×4=20.32
Position of the breaking contacts
5.08
2.54
Note) On the contacts there are
stamps “22” for AWG #22
and #24 types, and “26” for
AWG #26 and #28 types.
General tolerance:
±0.3
CAD Data
1. Use wires and contact types that
match.
The contact’s clamp is tamped with 22 or
26.
Use AWG#22 or #24 wire with the type
22 contact and AWG #26 or #28 wire with
the type 26 contact.
An incorrect combination will cause faulty
connections.
2. Use wires having a correct outer
insulation diameter.
The use of a wire with an outer insulation
diameter larger than the allowable value
or a wire with a hard material for the
insulation will cause faulty connections.
Furthermore, the use of a wire with an
outer insulation diameter less than the
allowable value will cause a drop in the
clamp strength. Use wires with a suitable
outer diameter and insulation material.
Suitable wire diameters are shown in the
table below.
Suitable wire diameters
*AWG#22 and #24 use different contacts from
AWG#26 and #28. Refer to the part number chart for
the part number.
3. Inserted wire length during wire
pressure welding
Insert the wire to a proper length and
perform the pressure welding.
If the inserted length is too short, the wire
will be pressure welded only at one
location.
If the inserted length is too long, the wire
will end up on the lance portion and a
proper pressure welding will not be
obtained.
4. Cut the end of the wire so that it is
straight and at. Be sure no uneven
strands remain.
5. When pressure welding a wire, fully
insert it to the proper position. Be sure
to squeeze the lever unit it reaches the
end position of the stroke.
6. After connecting the wire, check
that the wire clamp rmly clamps the
wire.
7. It may not be possible to cut a
contact from the carrier by folding the
contact only once.
8. The contact holder should be
replaced as needed.
Size
Insulation
outer
diameter
Remark
AWG#22
1.5 dia. to
1.1 dia.
AWG #22 is Stranded
wire of 12 stands/0.18
AWG#24
Stranded wire
AWG#26
1.3 dia. to
1.1 dia.
Stranded wire
AWG#28
For other details, please verify with
the product specication sheets.
panasonic-electric-works.net/ac
相關PDF資料 |
PDF描述 |
|---|---|
| AXW32014A | 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW3202421A | 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW3202431A | 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW32024A | 20 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
| AXW3261421A | 26 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, WELD, SOCKET |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AXW32014A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件狀態:過期 標準包裝:1 |
| AXW3202421A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件狀態:過期 標準包裝:1 |
| AXW3202431A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件狀態:過期 標準包裝:1 |
| AXW32024A | 功能描述:CONTACT 制造商:panasonic electric works 系列:* 零件狀態:過期 標準包裝:1 |
| AXW320-R | 制造商:IDEC Corporation 功能描述:22mm Emergency Stop |
發布緊急采購，3分鐘左右您將得到回復。