
NOT ES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
ZETTLER
electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-10-04
AZ955
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Standard coil:113 mW
Sensitive coil: 84 mW
.5 W at 20°C (68°F) ambient
Standard: 33°C (59°F) at nominal
coil voltage
Sensitive: 25°C (45°F) at nominal
coil voltage
Temperature
Max. 105°C (221°F)
GENERAL DAT A
Life Expectancy
Minimum operations
10 million operations
1 x 10
5
at rated load
Mechanical
Electrical
Operate Time (typical)
Standard: 3 ms at nominal coil voltage
Sensitive: 5 ms at nominal coil voltage
Release Time (typical)
1 ms at nominal coil voltage
(with no coil suppression)
Capacitance
Coil to contact: 3.0 pF
Contact to contact: 3.0 pF
Bounce (typical)
At 10 mA contact current
2 ms at operate
8 ms at release
Dielectric Strength
(at sea level for 1 min.)
500 Vrms between open contacts
Meets FCC Part 68.302 1500V lightning surge
Meets FCC Part 68.304 1000 V dielectric
1250 Vrms coil to contact
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
Standard: -40°C (-40°F) to 70°C (158°F)
Sensitive: -40°C (-40°F) to 80°C (176°F)
Both: -25°C (-13°F) to 105°C (221°F)
Storage
Vibration
0.039" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Immersion Time
30 seconds
Weight
1.8 grams
SUBMINIATURE
PC BOARD RELAY
FEATURES
Subminiature size for high density packaging
DIL pitch terminals
Epoxy sealed for automatic wave soldering
High sensitivity: 150 mW nominal with 84 mW pickup
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
UL file E43203; CSA file LR 702514
CONT ACT S
Arrangement
SPDT (1 Form C)
Bifurcated crossbar contacts
Ratings
Light Duty
Resistive load:
Max. switched power:
Max. switched current: 1 A
Max. switched voltage:
UL Rating:
1 A at 30 VDC
0.3 A at 60 VDC
0.5 A at 125 VAC
Silver alloy, gold clad
< 100 milliohms initially
30 W or 60 VA
60 VDC or 125 VAC
Material
Resistance