參數資料
型號： AZH2012
元件分類： 開關
英文描述： SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, 4.5mm, PANEL MOUNT
封裝： ROHS COMPLIANT
文件頁數： 16/30頁
文件大?。?/td> 1067K
代理商： AZH2012
8
α
Vmax (m/s)
CAUTIONS FOR USE
Pay attention to the following points
when designing the dog for limit switch
operation.
1. Make the dog faceplate as smooth
as possible.
2. Adjust both the dog angle and the
set arm angle as below, depending on
the operating speed.
3. The depth (h) of the dog effects the
lifespan of the limit switch. Therefore,
set the depth to a maximum of 80% of
the Total Travel (T.T.)
4. The relationship between the speed
of the dog (V = m/s) and the tip angle
(
α) is as follows:
1) V&0.2m/s
3) 0.5m/s ! V&2m/s
Because the arm jiggle is as a mini-
mum at a comparative speed such as
V&0.5m/s, setting both the dog angle
so that it travels perpendicularly and
the arm angle to 45° is optimum.
If overriding the dog, set the arm per-
pendicularly, so that
α =45°. If the dog
angle is reduced, the tolerable speed
is increased.
5) Roller plunger type
DESIGN OF OPERATING DOG AND OPERATING SPEED
When V&0.2m/s, set the arm to per-
pendicular and set the arm rise angle
to between 45° and 90°. If the dog rise
angle is reduced, the maximum tolera-
ble speed is increased.
As a rule,
α = 45° is optimum.
2) V&0.5m/s
The maximum tolerable speed can be
extended by further reducing the dog
rise angle from 45° when 0.5m/s !
V&2m/s. It is necessary to set the arm
so that the dog’s cutting surfaces are
always parallel (
θ o = 90°– α)
4) Overriding the dog (V&0.2m/s)
h
V
α = 45° to 90°
F
o
h
α
V
θ
F
h
V
α = 45°
o = 45
°
θ
h
α
h
α
45°
0.2
60°
0.1
60 to 90°
0.05
α
Vmax (m/s)
Even if overriding the dog, set the for-
wards and rearwards motion exactly
the same, and avoid any settings that
make the actuator accelerate rapidly
from the dog.
5. Operation speed
1) When the operation (acting and
reverting) speed is exceedingly slow,
switching of the contacts will become
unstable and this could cause prob-
lems such as failure to make contact
and welding. As a guide, the speed
should be at least 1mm/s.
2) When the operation (acting and
reverting) speed is exceedingly fast,
be careful because the violent motion
could cause breakage and with
increased frequency, contact switching
will not be able to keep up. As a guide,
the switching frequency should be
within 20 times per minute.
20°
0.5
30°
0.25
h
(0.5 to 0.7) T.T.
(0.6 to 0.8) T.T.
α
Vmax (m/s)
45°
0.2
60°
0.1
60 to 90°
0.05
α
Vmax (m/s)
40°
0.7
35°
0.9
30°
1.3
25°
2.0
相關PDF資料
PDF描述
AZ510442F SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, PANEL MOUNT
AZ51046619 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT
AZ7100F SNAP ACTING/LIMIT SWITCH, DPDT, MOMENTARY, 0.4A, 115VDC, 2.8mm, PANEL MOUNT
AZ7310 SNAP ACTING/LIMIT SWITCH, DPDT, MOMENTARY, 0.4A, 115VDC, 8mm, PANEL MOUNT-THREADED
AZ7411F SNAP ACTING/LIMIT SWITCH, DPDT, MOMENTARY, 0.4A, 115VDC, 17.5mm, PANEL MOUNT
相關代理商/技術參數
參數描述
AZH2013 制造商:Panasonic Electric Works 功能描述:Switch Limit N.O./N.C. SPDT Cross Roller Plunger Screw 5A 250VAC 250VDC 11.8N Linear Screw Mount
AZH2021 功能描述:SWITCH SNAP ACTION SPDT 5A 125V 制造商:panasonic industrial automation sales 系列:AZH 包裝:散裝 零件狀態:過期 電路:SPDT 開關功能:開-瞬時 額定電流:5A（AC/DC） 額定電壓 - AC:125V 額定電壓 - DC:30V 致動器類型:按片，滾軸 安裝類型:底座安裝 端子類型:螺絲端子 侵入防護:IP67 - 防塵，防水 特性:- 操作力，扭矩:250gf 釋放力:40gf 預行程:0.157"（4.0mm） 差動行程:0.025"（0.6mm） 超行程:0.276"（7.0mm） 工作位置:0.909"（23.1mm） 機械壽命:10，000，000 次循環 電氣壽命:100，000 次循環 工作溫度:-10°C ~ 80°C 標準包裝:1
AZH2024 制造商:Panasonic Electric Works 功能描述:
AZH2031 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Limit Switch, Panel Mount, Push Plunger, Die Cast, Screw Terminal, Standard
AZH2032 制造商:Panasonic Electric Works 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*