參數資料
      型號: BU-61582F0-391K
      廠商: DATA DEVICE CORP
      元件分類: 微控制器/微處理器
      英文描述: 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
      封裝: CERAMIC, DFP-70
      文件頁數: 34/48頁
      文件大?。?/td> 378K
      代理商: BU-61582F0-391K
      4
      Data Device Corporation
      www.ddc-web.com
      BU-61582
      G-08/02-250
      in.
      (mm)
      oz
      (g)
      1.9 X 1.0 X 0.215
      (48.26 x 25.4 x 5.46
      0.6
      (7)
      PHYSICAL CHARACTERISTICS
      Size
      ! 70-pin DIP, Flat Pack
      J-Lead, Gull Leads
      Weight
      ! 70-pin DIP, Flat Pack
      J-Lead, Gull Leads
      °C/W
      °C
      150
      +300
      4.6
      7.2
      12
      -55
      -65
      THERMAL
      Thermal Resistance, Junction-to-Case,
      Hottest Die (
      θJC)
      ! BU-61582X0
      ! BU-61582X1
      ! BU-61582X2
      ! BU-61582X3/X6
      Operating Junction Temperature
      Storage Temperature
      Lead Temperature (soldering, 10 sec.)
      s
      19.5
      23.5
      51.5
      131
      9
      2.5
      10.5
      18.5
      22.5
      50.5
      129.5
      668
      6.5
      17.5
      21.5
      49.5
      128
      4
      1553 MESSAGE TIMING
      Completion of CPU Write (BC Start-
      to-Start of Next Message)
      BC Intermessage Gap (Note 8)
      BC/RT/MT Response Timeout (Note 9)
      ! 18.5 nominal
      ! 22.5 nominal
      ! 50.5 nominal
      ! 128.0 nominal
      Transmitter Watchdog Timeout
      RT Response Timeout (Note 11)
      UNITS
      MAX
      TYP
      MIN
      PARAMETER
      TABLE 1. SP’ACE SERIES SPECIFICATIONS (CONT)
      TABLE 1 NOTES: Notes 1 through 6 are applicable to the Receiver
      Differential Resistance and Differential Capacitance specifications:
      (1) Specifications include both transmitter and receiver (tied together
      internally).
      (2) Measurement of impedance is directly between pins TX/RX A(B)
      and TX/RX A(B) of the SP'ACE Series hybrid.
      (3) Assuming the connection of all power and ground inputs to the
      hybrid.
      (4) The specifications are applicable for both unpowered and powered
      conditions.
      (5) The specifications assume a 2 volt rms balanced, differential, sinu-
      soidal input. The applicable frequency range is 75 kHz to 1 MHz.
      (6) Minimum resistance and maximum capacitance parameters are
      guaranteed, but not tested, over the operating range.
      (7) Assumes a common mode voltage within the frequency range of dc
      to 2 MHz, applied to pins of the isolation transformer on the stub
      side (either direct or transformer coupled), referenced to hybrid
      ground. Use a DDC recommended transformer or other transformer
      that provides an equivalent minimum CMRR.
      (8) Typical value for minimum intermessage gap time. Under software
      control, may be lengthened to (65,535 s minus message time), in
      increments of 1 s.
      INTRODUCTION
      DDC’s SP’ACE series of Integrated BC/RT/MT hybrids provide a
      complete, flexible interface between a microprocessor and a
      MIL-STD-1553A, B Notice 2, McAir, or STANAG 3838 bus,
      implementing Bus Controller, Remote Terminal (RT) and Monitor
      Terminal (MT) modes. Packaged in a single 1.9 square inch 70-
      pin DIP, surface mountable Flat Pack or Gull Lead, the SP’ACE
      series
      contains
      dual
      low-power
      transceivers
      and
      encoder/decoders, complete BC/RT/MT multiprotocol logic,
      memory management and interrupt logic, 16K X 16 of shared
      static RAM and a direct, buffered interface to a host processor
      bus.
      The BU-61582 contains internal address latches and bidirection-
      al data buffers to provide a direct interface to a host processor
      bus. The BU-61582 may be interfaced directly to both 16-bit and
      8-bit microprocessors in a buffered shared RAM configuration. In
      addition, the SP’ACE may connect to a 16-bit processor bus via
      a Direct Memory Access (DMA) interface. The BU-61582
      includes 16K words of buffered RAM. Alternatively, the SP’ACE
      may be interfaced to as much as 64k words of external RAM in
      either the shared RAM or DMA configurations.
      The SP’ACE RT mode is multiprotocol, supporting MIL-STD-
      1553A, MIL-STD-1553B Notice 2, and STANAG 3838 (including
      EFAbus).
      The memory management scheme for RT mode provides an
      option for separation of broadcast data, in compliance with
      1553B Notice 2. Both double buffer and circular buffer options
      are programmable by subaddress. These features serve to
      ensure data consistency and to off-load the host processor for
      bulk data transfer applications.
      The SP’ACE series implements three monitor modes: a word
      monitor, a selective message monitor, and a combined RT/selec-
      tive monitor.
      Other features include options for automatic retries and pro-
      grammable intermessage gap for BC mode, an internal Time Tag
      Register, an Interrupt Status Register and internal command ille-
      galization for RT mode.
      CLOCK INPUT
      Frequency
      ! Nominal Value (programmable)
      Default Mode
      Option
      ! Long Term Tolerance
      1553A Compliance
      1553B Compliance
      ! Short Term Tolerance,1 second
      1553A Compliance
      1553B Compliance
      ! Duty Cycle
      16 MHz
      12 MHz
      MHz
      %
      0.01
      0.1
      0.001
      0.01
      67
      60
      16.0
      12.0
      33
      40
      TABLE 1 NOTES (cont)
      (9) Software programmable (4 options). Includes RT-to-RT Timeout
      (Mid-Parity of Transmit Command to Mid-Sync of Transmitting RT
      Status).
      (10) For both +5 V logic and transceiver. +5 V for channels A and B.
      (11) Measured from mid-parity crossing of Command Word to mid-sync
      crossing of RT's Status Word.
      相關PDF資料
      PDF描述
      BU-61582F0-391Y 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
      BU-61582F0-391Z 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
      BU-61582F0-400K 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
      BU-61582F0-400Q 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
      BU-61582F0-411L 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
      相關代理商/技術參數
      參數描述
      BU-61585 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |ACE
      BU-61586 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |ACE
      BU61586V6-300 制造商:DDC 功能描述:MIL-STD-1553/ARINC BUS CONTROLLER/RTU, 70 Pin, Flat Pack
      BU-61588 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS
      BU-61588F0 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS