- 您現在的位置：買賣IC網 > PDF目錄223461 > BU-61703F4-132Z (DATA DEVICE CORP) 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 PDF資料下載
參數資料
| 型號： | BU-61703F4-132Z |
| 廠商： | DATA DEVICE CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| 封裝： | 1 X 1 INCH, 0.155 INCH HEIGHT, CERAMIC, FP-72 |
| 文件頁數： | 35/52頁 |
| 文件大?。?/td> | 367K |
| 代理商： | BU-61703F4-132Z |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁當前第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁
40
TRANSMIT VECTOR WORD (
= 1; 10000)
MESSAGE SEQUENCE = TRANSMIT VECTOR WORD + STATUS VECTOR WORD
The SSRT transmits a Status Word followed by a vector word. The vector word is read from the external subsystem.
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Command Followed by Data Word. No Status response. Set Message Error bit (Status Word), High Word Count (BIT Word).
3.
bit Set to Zero. No Status response. Set Message Error bit (Status Word), and Low Word Count (BIT Word).
4.
bit Set to Zero plus one Data Word. The SSRT will respond with Status
5. Zero
bit and Broadcast Address, no Data Word. No Status response. Set Message Error and Broadcast Command Received bits
(Status Word), and Low Word Count (BIT word).
6. Zero
bit and Broadcast Address, plus one Data Word. No Status response. Set Broadcast Command Received bits (Status Word)
7. Broadcast Address. No Status response. Set Message Error and Broadcast Command Received bits (Status Word),
Command Word Contents Error (BIT word).
R
T/
R
T/
R
T/
R
T/
R
T/
SYNCHRONIZE WITH DATA WORD (
= 0; 10001)
MESSAGE SEQUENCE = SYNCHRONIZE COMMAND/DATA WORD + STATUS
The SSRT will write the received 16 bit data word to the external subsystem.
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Correct Command Not Followed by Data Word. No Status response. Set Message Error bit (Status Word), Low Word Count (BIT Word)
3. Command Followed by too many Data Words. No Status response. Set Message Error bit (Status Word), High Word Count (BIT word).
4. Command
bit set to One followed by Data Word. No Status response. Set Message Error bit (Status Word), and
High Word Count (BIT Word).
5. Command
bit set to One not followed by Data Word. he SSRT replies with Status plus one Data Word. The Data Word is read from
the subsystem (or single-word data block for subaddress 0000 or 1111).
6. Command
bit Set to One and Broadcast Address. No Status response. Set Message Error and Broadcast Command Received
bits (Status Word); Set Command Word Contents Error (BIT word).
R
T/
R
T/
R
T/
R
T/
RESERVED MODE CODES (
= 1; 01001 - 01111)
MESSAGE SEQUENCE = RESERVED MODE COMMAND + STATUS
The SSRT responds with status. If the command has been illegalized by means of the illegalization table, the Message Error Status Word bit will
be set.
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Command Followed by Data Word. No Status response. Set Message Error bit (Status Word), High Word Count (BIT Word).
3.
bit Set to Zero. No status response. Set Message Error bit (Status Word), Command Word Contents Error (BIT Word).
4. Zero
bit and Broadcast Address. No Status response. Set Message Error and Broadcast Command Received bits (Status word),
Command Word Contents Error (BIT Word).
R
T/
R
T/
R
T/
RESET REMOTE TERMINAL (
= 1; 01000)
MESSAGE SEQUENCE = RESET REMOTE TERMINAL + STATUS
The SSRT responds with Status and internally resets. The Message Error and Broadcast Command Received bits of the internal Status register
are reset to 0. The internal BIT Word Register is reset to 0. If either of the 1553 transmitters has been shut down, the shutdown condition is over-
ridden. If the Terminal Flag bit has been inhibited, the inhibit is overridden.
If the command is received as a broadcast, the Broadcast Command Received bit is set and the Status Word is suppressed. Also, if the com-
mand is received as a broadcast and the Terminal Flag bit had been set as a result of the Loopback test of the previous message, the Terminal
Flag bit is not reset to zero.
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Command Followed by Data Word. No Status response. Set Message Error bit (Status Word), High Word Count (BIT Word).
3.
bit Set to Zero. No status response. Set Message Error bit (Status Word), Command Word Contents Error (BIT Word).
4. Zero
bit and Broadcast Address. No Status response. Set Message Error and Broadcast Command Received bits (Status word),
Command Word Contents Error (BIT Word).
R
T/
R
T/
R
T/
相關PDF資料 |
PDF描述 |
|---|---|
| BU-61703F4-142L | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61703F4-142Z | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61703F4-142 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61703F4-152Q | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61703F4-162W | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BU-61705 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |Simple System RT |
| BU-61740B3NEW | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |μ-ACE (Micro-ACE?) |
| BU-61743 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |Enhanced Mini-ACE? |
| BU-61743F3-100 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61743F3-110 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
發布緊急采購，3分鐘左右您將得到回復。