- 您現在的位置：買賣IC網 > PDF目錄166585 > BU-61864G3-150Y (DATA DEVICE CORP) 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 PDF資料下載
參數資料
| 型號： | BU-61864G3-150Y |
| 廠商： | DATA DEVICE CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| 封裝： | 25.40 X 25.40 MM, 2.54 MM HEIGHT, CERAMIC, QFP-72 |
| 文件頁數： | 18/60頁 |
| 文件大?。?/td> | 457K |
| 代理商： | BU-61864G3-150Y |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁當前第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁
25
Data Device Corporation
www.ddc-web.com
BU-6174X/6184X/6186X
F-10/02-300
SINGLE BUFFERED MODE
The operation of the single buffered RT mode is illustrated in
FIGURE 6. In the single buffered mode, the respective lookup
table entry must be written by the host processor. Received data
words are written to, or transmitted data words are read from the
data word block with starting address referenced by the lookup
table pointer. In the single buffered mode, the current lookup
table pointer is not updated by the Enhanced Mini-ACE/-ACE
memory management logic. Therefore, if a subsequent message
is received for the same subaddress, the same Data Word block
will be overwritten or overread.
SUBADDRESS DOUBLE BUFFERING MODE
The Enhanced Mini-ACE/-ACE provides a double buffering
mechanism for received data, that may be selected on an individ-
ual subaddress basis for any or all receive (and/or broadcast) sub-
addresses. This is illustrated in FIGURE 7. It should be noted that
the Subaddress Double Buffering mode is applicable for receive
data only, not for transmit data. Double buffering of transmit
messages may be easily implemented by software techniques.
The purpose of the subaddress double buffering mode is to pro-
vide data sample consistency to the host processor. This is
accomplished by allocating two 32-word data word blocks for
each individual receive (and/or broadcast receive) subaddress.
At any given time, one of the blocks will be designated as the
"active" 1553 block while the other will be considered as "inac-
tive". The data words for the next receive command to that sub-
address will be stored in the active block. Following receipt of a
valid message, the Enhanced Mini-ACE/-ACE will automatical-
ly switch the active and inactive blocks for that subaddress. As a
result, the latest, valid, complete data block is always accessible
to the host processor.
CIRCULAR BUFFER MODE
The operation of the Enhanced Mini-ACE/-ACE's circular buffer
RT memory management mode is illustrated in FIGURE 8. As in
the single buffered and double buffered modes, the individual
lookup table entries are initially loaded by the host processor. At
the start of each message, the lookup table entry is stored in the
third position of the respective message block descriptor in the
descriptor stack area of RAM. Receive or transmit data words
are transferred to (from) the circular buffer, starting at the loca-
tion referenced by the lookup table pointer.
In general, the location after the last data word written or read
(modulo the circular buffer size) during the message is written to
the respective lookup table location during the end-of-message
sequence. By so doing, data for the next message for the respec-
tive transmit, receive(/broadcast), or broadcast subaddress will
be accessed from the next lower contiguous block of locations in
the circular buffer.
For the case of a receive (or broadcast receive) message with a
data word error, there is an option such that the lookup table
pointer will only be updated following receipt of a valid message.
That is, the pointer will not be updated following receipt of a
message with an error in a data word. This allows failed mes-
sages in a bulk data transfer to be retried without disrupting the
circular buffer data structure, and without intervention by the
RT's host processor.
GLOBAL CIRCULAR BUFFER
Beyond the programmable choice of single buffer mode, double
buffer mode, or circular buffer mode, programmable on an indi-
vidual subaddress basis, the Enhanced Mini-ACE/-ACE RT
architecture provides an additional option, a variable sized glob-
FIGURE 6. RT SINGLE BUFFERED MODE
DATA
BLOCKS
DATA BLOCK
BLOCK STATUS WORD
TIME TAG WORD
DATA BLOCK POINTER
RECEIVED COMMAND
WORD
DESCRIPTOR
STACKS
LOOK-UP
TABLE ADDR
LOOK-UP TABLE
(DATA BLOCK ADDR)
15
13
0
CURRENT
AREA B/A
CONFIGURATION
REGISTER
STACK
POINTERS
(See note)
Note: Lookup table is not used for mode commands when enhanced mode codes are enabled.
相關PDF資料 |
PDF描述 |
|---|---|
| BU-61864G3-150Z | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61864G3-152L | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61864G3-160Z | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61864G3-162L | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61864G3-170K | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BU-61864G4-100 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61864G4-110 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61864G4-200 | 制造商:DDC 功能描述:MIL-STD-1553/ARINC BUS CONTROLLER/RTU, 72 Pin, QFP |
| BU-61865 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |Enhanced Mini-ACE? |
| BU-61865F3-100 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
發布緊急采購，3分鐘左右您將得到回復。
