47
Data Device Corporation
www.ddc-web.com
BU-64703
D-03/06-0
ORDERING INFORMATION
BU-64703XX-XXXX
Supplemental Process Requirements:
S = Pre-Cap Source Inspection
L = 100% Pull Test
Q = 100% Pull Test and Pre-Cap Source Inspection
K = One Lot Date Code
W = One Lot Date Code and PreCap Source Inspection
Y = One Lot Date Code and 100% Pull Test
Z = One Lot Date Code, PreCap Source Inspection and 100% Pull Test
Blank = None of the Above
Test Criteria:
0 = Standard Testing
2 = MIL-STD-1760 Amplitude Compliant (Not available with Voltage/Transceiver Option 4 & 9)
Process Requirements:
0 = Standard DDC practices, no Burn-In (See Standard DDC Processing Table)
1 = MIL-PRF-38534 Compliant (Note 4)
2 = B (Note 1)
3 = MIL-PRF-38534 Compliant with PIND Testing (Note 4)
4 = MIL-PRF-38534 Compliant with Solder Dip (Note 4)
5 = MIL-PRF-38534 Compliant with PIND Testing and Solder Dip (Note 4)
6 = B (Note 1) with PIND Testing
7 = B (Note 1) with Solder Dip
8 = B (Note 1) with PIND Testing and Solder Dip
9 = Standard DDC Processing with Solder Dip, no Burn-In
Temperature Range(Note 2)/Data Requirements:
1 = -55°C to +125°C
2 = -40°C to +85°C
3 = 0°C to +70°C
4 = -55°C to +125°C with Variables Test Data
5 = -40°C to +85°C with Variables Test Data
6 = Custom Part (Reserved)
7 = Custom Part (Reserved)
8 = 0°C to +70°C with Variables Test Data
Voltage/Transceiver Option:
3 = +5.0 Volts rise/fall times = 100 to 300 ns (-1553B)
4 = +5.0 Volts rise/fall times = 200 to 300 ns (-1553B & McAir Compatible)(Not available with test
criteria option “2” MIL-STD-1760 Amplitude Compliant)
8 = +3.3 Volts rise/fall times = 100 to 300 ns (-1553B)
9 = +3.3 Volts rise/fall times = 200 to 300 ns (-1553B and McAir
compatible) (Not available with Test Criteria Option “2” MIL-STD-1760 Amplitude Compliant)
Package Type:
F = Flat Pack
G = “Gull Wing” (Formed Lead)
B = BGA Package (Consult factory)
Logic Voltage
3 = 3.3 Volt (+5.0V Tolerant I/O)
Product Type:
BU-6470 = RT only with simple (non-processor) interface
BU-64703E8-300 (Ordering information for SSRT-Mark3 (+3.3V) Transceiver Evaluation Board)
Evaluation board intended to support customers who are interested in electrically connecting and evaluating the performance of the +3.3V SSRT Mark3
Notes:
1. Standard DDC Processing with burn-in and full temperature test—see STANDARD DDC PROCESSING TABLE.
2. Temperature range refers to “Case Temperature”.
3. The above products contain tin-lead solder finish as applicable to solder dip requirements.
4. MIL-PRF-38534 product grading is designated with the following dash numbers:
Class H is a -11X, 13X, 14X, 15X, 41X, 43X, 44X, 45X
Class G is a -21X, 23X, 24X, 25X, 51X, 53X, 54X, 55X
Class D is a -31X, 33X, 34X, 35X, 81X, 83X, 84X, 85X