參數資料
型號： CK2540-9EPD0TB2
廠商： POWER-ONE INC
元件分類： 電源模塊
英文描述： 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE
封裝： METAL, CASE K02, MODULE
文件頁數： 6/31頁
文件大?。?/td> 637K
代理商： CK2540-9EPD0TB2
Cassette Style
150 Watt DC-DC Converters
K Series
Edition 01/01.2000
14/31
Fig. 15
Typical output response as a function of inhibit control
Table 5: Inhibit characteristics
Characteristic
Conditions
min
typ
max Unit
Uinh Inhibit
Uo = on
Ui min…Ui max
–50
0.8
V
voltage
Uo = off
2.4
50
Iinh
Inhibit current
Uinh = 0
–400
A
tr
Rise time
30
ms
tf
Fall time
depending on
Io
0
t
0
Inhibit
1
0.1
1
Uo/Uo nom
tr
tf
06001
Sense Lines
(Only for single output units 5.1 V, 12 V, 15 V, 24 V)
This feature enables for compensation of voltage drops
across the connector contacts and if necessary, across the
load lines. If the sense lines are connected at the load
rather than directly at the connector, the user should ensure
that
Uo max (between Vo1+ and Vo1–) is not exceeded. We
recommend connecting the sense lines directly at the fe-
male connector.
For further information, please refer to:
Application Notes.
To ensure correct operation, both sense lines (S+ and S–)
should be connected to their respective power outputs
(Vo1+ and Vo1–) and the voltage difference between any
sense line and its respective power output pin (as meas-
ured on the connector) should not exceed the following val-
ues:
Table 6: Maximum voltage compensation allowed using
sense lines
Output
Total voltage difference
Voltage difference
voltage
between sense lines and
between
their respective outputs
Vo– and S–
5.1 V
< 0.5 V
< 0.25 V
12 V, 15 V
< 1.0 V
< 0.25 V
If the output voltages are increased above
Uo nom via R-in-
put control, option P setting, remote sensing or option T, the
output currents must be reduced accordingly so that
Po nom is not exceeded.
Note: The output terminals Vo1+ and Vo1– must always be
connected to the load before connecting the sense lines S+
and S–, otherwise the unit will be damaged.
Auxiliary Functions
i Inhibit for Remote On and Off
Note: With open i input: Output is disabled (
Uo = off).
The outputs of the module may be enabled or disabled by
means of a logic signal (TTL, CMOS, etc.) applied between
the inhibit input i and the negative pin of output 1 (Vo1–). In
systems with several units, this feature can be used, for ex-
ample, to control the activation sequence of the converters.
If the inhibit function is not required, connect the inhibit pin
18 to pin 14 to enable the outputs (active low logic, fail
safe). For output response refer to:
Hold-up Time and Out-
put Response.
Vi+
Vi–
Vo–
i
Vo+
Iinh
Uinh
06031
1.6
0.8
0
–0.8
–50
Uinh [V]
Iinh [mA]
–30
0
–10
10
30
50
2.0
1.2
0.4
–0.4
Uinh = 0.8 V
Uo = on
Uo = off
Uinh = 2.4 V
06032
Fig. 13
Definition of Uinh and Iinh.
Fig. 14
Typical inhibit current Iinh versus inhibit voltage Uinh
相關PDF資料
PDF描述
CK2540-9ERD1B2 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE
CK2540-9ERD8TB2 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE
CK2660-9ERD3TB2 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE
CD-700-KAC-GGB-12.352 PHASE LOCKED LOOP, CQCC16
CD-700-KAC-HAB-12.000 PHASE LOCKED LOOP, CQCC16
相關代理商/技術參數
參數描述
CK2540-9ER 制造商:Power-One 功能描述:DCDC - Bulk
CK2540-9ERB1 功能描述:DC/DC CONVERTER DUAL 15V 5A 制造商:bel power solutions 系列:Melcher K 包裝:散裝 零件狀態:有效 類型:隔離 電壓 - 輸入:28 ~ 140 V 輸出:15V，15V 輸出數:2 不同電流時的輸出（最大值） - 1:15 VDC @ 5A 不同電流時的輸出（最大值） - 2:15 VDC @ 5A 不同電流時的輸出（最大值） - 3:- 不同電流時的輸出（最大值） - 4:- 功率（W）:150W 應用:ITE（商業），鐵路 安裝類型:底座安裝 工作溫度:-40°C ~ 71°C 效率:82% 封裝/外殼:- 大小/尺寸:6.61" 長 x 5.51" 寬 x 1.86" 高（168.0mm x 140.0mm x 47.2mm） 功率（W） - 最大值:150W 認可:cCSAus，CE，TUV 標準包裝:1
CK2540-9ERD3TB1 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:150 Watt DC-DC and AC-DC Converters
CK2540-9ERT 制造商:Power-One 功能描述:- Bulk
CK2598 制造商:Lorlin Electronics Ltd 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*