參數資料
型號： CT2-MI2LBCW4YC2
廠商： JDS UNIPHASE CORP
元件分類： 光收發
英文描述： FIBER OPTIC TRANSCEIVER, 1525-1538nm, 2500Mbps(Tx), 2500Mbps(Rx), PANEL MOUNT, LC CONNECTOR
文件頁數： 7/8頁
文件大?。?/td> 204K
代理商： CT2-MI2LBCW4YC2
7
2.5 GB/S CWDM SFP TRANSCEIVER
Optical Specifications
Parameter
40 km (PIN) at OC-48
80 km (APD) at OC-48
Average output power1
Minimum
0 dBm
Typical
1.5 dBm
Maximum
4 dBm
BOL power output1
Minimum
0.5 dBm
Typical
1.5 dBm
Maximum
3 dBm
TX operating wavelength
Minimum
-6.5 nm
Typical
Center
Maximum
6.5 nm
Spectral width2
Typical
0.3 nm
Maximum
1 nm
Side mode suppression ratio (DFB laser)3
Minimum
30 dB
Extinction ratio4 (BOL)
Minimum
9.0 dB
9 dB
Typical
10.0 dB
10 dB
Maximum
11.5 dB
Extinction ratio4 (EOL)
Minimum
8.2 dB
Maximum
12.0 dB
Optical rise and fall times (20 to 80%)5
Maximum
200 ps
Eye mask of optical output
Compliant with GR-253
and ITU-T G.957
Eye mask margin (filtered)
Minimum
10%
Typical
15%
Jitter generation (peak-to-peak)6
Maximum
70 mUIP-P
Jitter generation (rms)6
Maximum
7 mUIrms
Power output with transmitter disabled
Typical
-50 dBm
Maximum
-40 dBm
Receiver sensitivity (BOL, BER=1 x 10-10, ER=10 dB)
Minimum
-21 dBm
-30 dBm
Typical
-23 dBm
-32 dBm
Receiver sensitivity (EOL, BER=1 x 10-10, ER=8.2 dB)
Minimum
-18 dBm
-28 dBm
Maximum received optical power
Minimum
0 dBm
-8 dBm
Link status response time
Minimum
3 s
Typical
50 s
Maximum
100 s
Optical path penalty
Maximum
1.5 dB
2.5 dB
Dispersion
Maximum
1000 ps/nm
1600 ps/nm
Receiver reflectance
Maximum
-27 dB
Minimum optical return loss
Minimum
-24 dB
BER floor
Maximum
10-15
Reflect into Tx for <1 dB degradation at the receiver
Maximum
-24 dB
Bit rate
155 to 2700 Mb/s
1. Fiber coupled power, connector repeatability is ±1 dB.
2. Full spectral width measured 20 dB down from the central wavelength peak under fully modulated conditions (for DFB lasers).
3. Ratio of the average output power in the dominant longitudinal mode to the power in the most significant side mode under fully modulated conditions.
4. Ratio of logic 1 output power to logic 0 output power under fully modulated conditions. When operated at data rates below 1 Gb/s, the maximum extinction ratio
specification is increased by 2 dB.
5. Using an unfiltered measurement.
6. Formatted OC-48 pattern with scrambled PRBS 23 payload using Agilent Omni BER as the optical source driving an external OC-48 optical receiver with CDR. The
differential data outputs of this optical receiver with CDR. The differential dataoutputs of this optical receiver are used as the electrical inputs for the CT2 transmitter which
optically drives the Omni BER receiver input.
相關PDF資料
PDF描述
CT2-MI2LBCW4YC3 FIBER OPTIC TRANSCEIVER, 1525-1538nm, 2500Mbps(Tx), 2500Mbps(Rx), PANEL MOUNT, LC CONNECTOR
CT2-MI2LBCW4YC4 FIBER OPTIC TRANSCEIVER, 1525-1538nm, 2500Mbps(Tx), 2500Mbps(Rx), PANEL MOUNT, LC CONNECTOR
CT2-MI2LBCW53C3 FIBER OPTIC TRANSCEIVER, 1545-1558nm, 2500Mbps(Tx), 2500Mbps(Rx), PANEL MOUNT, LC CONNECTOR
CT2-MI2LBCW53C4 FIBER OPTIC TRANSCEIVER, 1545-1558nm, 2500Mbps(Tx), 2500Mbps(Rx), PANEL MOUNT, LC CONNECTOR
CT2-MI2LBCW5YC3 FIBER OPTIC TRANSCEIVER, 1545-1558nm, 2500Mbps(Tx), 2500Mbps(Rx), PANEL MOUNT, LC CONNECTOR
相關代理商/技術參數
參數描述
CT2-MI2LBCW51C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:2.5 Gb/s CWDM SFP Transceiver (Multirate)
CT2-MI2LBCW53C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:2.5 Gb/s CWDM SFP Transceiver (Multirate)
CT2-MI2LBCW5YC 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:2.5 Gb/s CWDM SFP Transceiver (Multirate)
CT2-MI2LBCW61C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:2.5 Gb/s CWDM SFP Transceiver (Multirate)
CT2-MI2LBCW63C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:2.5 Gb/s CWDM SFP Transceiver (Multirate)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*