- 您現在的位置：買賣IC網 > PDF目錄376525 > D2SW-3L1M (Electronic Theatre Controls, Inc.) Watertight Miniature Basic Switch PDF資料下載
參數資料
| 型號： | D2SW-3L1M |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | Watertight Miniature Basic Switch |
| 中文描述： | 水密小型基本開關 |
| 文件頁數： | 6/6頁 |
| 文件大小： | 95K |
| 代理商： | D2SW-3L1M |
D2SW
D2SW
132
Precautions
Mounting
Use two M3 mounting screws with spring washers to mount the
switch.
T
ighten the screws to a
torque of 0.23 to 0.26 N
m (2.3 to
2.7 kgf
cm).
Mounting Holes
9.5
Two 2.4 dia. or M2.3 mounting holes
When
soldering a lead wire
to a terminal of the D2SW
, use a solder
-
ing
iron with a maximum capacity of 60 W and do not take more than
5 s to solder the lead wire, otherwise the characteristics of the
D2SW
may be altered.
Make
sure that there is no icing when using the D2SW at low ambi
-
ent
temperatures.
Operations
Make
sure that the switching object is perfectly separated from the
actuator
when the switch is not operated and the actuator is pressed
appropriately
by the switching object
when the switch is operated.
The
switch should be set so that its stroke will be within the rated OT
when
the switch is operated.
Install
the switching object so that its moving direction is the same
as
that of the actuator
.
Handle
D2SW models
with pin plungers with care so that the sealing
rubber
parts around the pin plungers will not be damaged.
Recommended
conductor size for
the 0.1 A-series solder terminal
is
A
WG26 to 18 (0.13 to 0.83 mm
2
).
Enclosure Ratings
The
D2SW was tested underwater and passed the following water
-
tightness
tests, which however
, does not mean that the D2SW
can
be
used in the water
.
JIS
C0920 (rules for testing
the watertightness of electrical devices
and
materials), class 7 (watertightness test). Refer to the following
illustration
for the test method.
IEC
Publication 529, class IP67. Refer to the following illustration for
the
test method.
Note:
The
object to be tested is left in the water for 30 minutes
on
condition that the distance between the surface of the
water and the top of the object be 15 cm minimum and
the distance between the surface of the water and the
bottom
of the object be 1 m minimum.
éééé
éééé
éééé
éééé
Water
1m min.
15cm min.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To
convert millimeters into inches, multiply by 0.03937. T
o convert grams into ounces, multiply by 0.03527.
Cat. No. C97-E1-1
Distributed by: Diamond Electronics Ltd
Tel: +44(0)1477 500450 Fax: +44(0)1477 500656 Mail: sales@diamondelec.co.uk
Web: www.diamondelec.co.uk
相關PDF資料 |
PDF描述 |
|---|---|
| D2SW-3L1T | Watertight Miniature Basic Switch |
| D2SW-3L2D | Watertight Miniature Basic Switch |
| D2SW-3L2H | Watertight Miniature Basic Switch |
| D2SW-3L2M | Watertight Miniature Basic Switch |
| D2SW-3L2T | Watertight Miniature Basic Switch |
相關代理商/技術參數 |
參數描述 |
|---|---|
| D2SW3L1MS | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT HINGE LVR WIRE LEAD 3A 250VAC 30VDC 0.59N - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH 3A LEVER SEALED 12"WIRES 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.O./N.C. SPDT Hinge Lever Wire Lead 3A 250VAC 30VDC 0.59N Screw Mount |
| D2SW-3L1MS | 功能描述:基本/快動開關 HINGE LEVER W/ LEADS RoHS:否 制造商:Omron Electronics 觸點形式:SPDT 執行器:Lever 電流額定值:5 A 電壓額定值 AC:250 V 電壓額定值 DC:30 V 功率額定值: 工作力:120 g IP 等級:IP 67 NEMA 額定值: 端接類型:Wire 安裝:Panel |
| D2SW-3L1MS | 制造商:Omron Electronic Components LLC 功能描述:MICRO SWITCH HINGE LEVER SPDT 3A 250V |
| D2SW3L1T | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT HINGE LVR QC 3A 250VAC 30VDC 0.59N TH - Trays 制造商:Omron Electronic Components LLC 功能描述:REPLACED BY D2SW-3L1TS |
| D2SW-3L1T | 功能描述:基本/快動開關 REPLACED BY D2SW-3L1TS RoHS:否 制造商:Omron Electronics 觸點形式:SPDT 執行器:Lever 電流額定值:5 A 電壓額定值 AC:250 V 電壓額定值 DC:30 V 功率額定值: 工作力:120 g IP 等級:IP 67 NEMA 額定值: 端接類型:Wire 安裝:Panel |
發布緊急采購，3分鐘左右您將得到回復。