參數資料
型號: D3K-B
元件分類: 開關
英文描述: SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.01A, 12VDC, PANEL MOUNT
封裝: ROHS COMPLIANT
文件頁數: 4/6頁
文件大?。?/td> 456K
代理商: D3K-B
4
Connector Termination Switch
D3K
Precautions
■ Mounting Dimensions
Mounting
Refer to the following mounting hole dimensions and be sure that the
burred side is opposite to the Switch mounting side.
If further mounting security is required for the prevention of rattling,
contact your OMRON representative.
By changing the 1.9±0.05-dia. hole to a 1.7 to 1.8-dia. hole, the pin
on the Switch side will need to be pressed in. This will reduce the
clattering of the pin.
Plate thickness t=0.8
Plate thickness t=1.0
Plate thickness t=1.2
Note: The switch lever is set in the direction indicated by an arrow in
the above illustration.
Lever Load
Do not impose loads in the following directions on the lever, other-
wise the D3K may be damaged or malfunction.
Operating Object
The operating object must fully press the lever when the operating
object travels and must be perfectly separated from the lever when
the operating object is in the free position. The operating object must
not be pressed excessively to exceed the TTP, otherwise the D3K
may be damaged. Be sure that the operating object imposes a
proper load on the lever according to the motion of the lever.
■ Connector
Use the following type CT connectors of Nippon AMP for wiring the
D3K:
The above connectors are not sold by OMRON. Contact the following
offices for these connectors:
AMP (Japan), Ltd.
Phone: 81-44-844-8111
AMP Inc. (U.S.A.)
Phone 1-800-522-6752
AMP of Great Britain Ltd.
Phone: 44-181-954-2356
AMP Products Pacific Ltd. (Hong Kong)
Phone: 852-2735-1628
Press-fit connector
173977-2
Crimp-style connector housing 179228-2
Crimp-style connector contact
179227-1
相關PDF資料
PDF描述
D4-09SM-P-010 INTERCONNECTION DEVICE
D4-28SM-P-010 INTERCONNECTION DEVICE
D4-D8M5-P-010 INTERCONNECTION DEVICE
D40KN NPN, Si, POWER TRANSISTOR, TO-202-2
D44H11 Card Edge Connector; No. of Contacts:36; Pitch Spacing:0.156"; Contact Termination:Solder; Leaded Process Compatible:Yes; Mounting Hole Dia:0.128" RoHS Compliant: Yes
相關代理商/技術參數
參數描述
D3KB05 制造商:HY 制造商全稱:HY ELECTRONIC CORP. 功能描述:GLASS PASSIVATED BRIDGE RECTIFIERS
D3KB06 制造商:HY 制造商全稱:HY ELECTRONIC CORP. 功能描述:GLASS PASSIVATED BRIDGE RECTIFIERS
D3KB07 制造商:HY 制造商全稱:HY ELECTRONIC CORP. 功能描述:GLASS PASSIVATED BRIDGE RECTIFIERS
D3KB08 制造商:HY 制造商全稱:HY ELECTRONIC CORP. 功能描述:GLASS PASSIVATED BRIDGE RECTIFIERS
D3KB09 制造商:HY 制造商全稱:HY ELECTRONIC CORP. 功能描述:GLASS PASSIVATED BRIDGE RECTIFIERS