3
FN3118.5
November 19, 2007
Absolute Maximum Ratings
Thermal Information
V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44V
VIN to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V- to V+
VL to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 25V
VS or VD to V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to -36V
VS or VD to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to 36V
V+ to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
V- to Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25V
Current, any Terminal Except S or D . . . . . . . . . . . . . . . . . . . . 30mA
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Peak Current, S or D (Pulsed 1ms, 10% Duty Cycle Max) . . . . . 70mA
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Thermal Resistance (Typical, Note
1)θ
JA (°C/W)
PDIP Package* . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120
TSSOP Package . . . . . . . . . . . . . . . . . . . . . . . . . . .
150
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . -65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
*Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
1.
θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications
V+ = +15V, V- = -15V, VL = +5V, GND, TA = +25°C
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
VS = 10V, RL = 1kΩ, CL = 35pF
-
460
-
ns
Turn-OFF Time
tOFF1
-
360
-
ns
tOFF2
-
450
-
ns
OFF Isolation, OIRR (Note
5)VIN = 5V, RL = 1kΩ, CL = 15pF, VS = 1VRMS,
f = 100kHz
-70
-
dB
Crosstalk (Channel-to-Channel), CCRR
-
-90
-
dB
Source OFF-Capacitance, CS(OFF)
VD = VS = 0V, VIN = 5V, f = 1MHz
-
5
-
pF
Drain OFF-Capacitance, CD(OFF)
-5
-
pF
Channel ON-Capacitance, CD(ON) + CS(ON)
-16
-
pF
DIGITAL INPUT CHARACTERISTICS
Input Current with Voltage High, IIH
VIN = 2.4V
-1.0
-0.0004
-
A
VIN = 15V
-
0.003
1.0
A
Input Current with Voltage Low, IIL
VIN = 0V
-1.0
-0.0004
-
A
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
-15
-
15
V
Drain-Source ON-Resistance, rDS(ON)
VD = ±10V, IS = 1mA, VIN = 0.8V
-
150
175
Ω
Source OFF Leakage Current, IS(OFF)
VIN = 2.4V
VS = 14V, VD = -14V
-
0.01
5.0
nA
VS = -14V, VD = 14V
-5.0
-0.02
-
nA
Drain OFF Leakage Current, ID(OFF)
VS = -14V, VD = 14V
-
0.01
5.0
nA
VS = 14V, VD = -14V
-5.0
-0.02
-
nA
Drain ON Leakage Current, ID(ON)
VIN = 0.8V
VS = VD = 14V
-
0.1
5.0
nA
VS = VD = -14V
-5.0
-0.15
-
nA
DG211