37 Watt, Isolated DC/DC Converters
VOUT Combinations of 3.3/2.5/1.8/1.5 Volts
Dual Output
Mixed Voltage, DLV Models
Features
Figure 1. Simplied Schematic
DATEL, Inc., Manseld, MA 02048 (USA) Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 Email: sales@datel.com Internet: www.datel.com
DATEL’s new DLV Series, dual-output, low-voltage DC/DC’s provide any output
combination of 3.3V (to 6 Amps) and 2.5/1.8/1.5 (to 7 Amps). Designed with two
control loops for two independently regulated outputs (both using synchronous rec-
tication), DLV’s are impressively efcient (to 85%) and able to supply their full 13
Amps of output current (37W for the 3.3V/2.5V models) up to +60°C ambient with
no derating (model dependent).
Housed in standard 2" x 2" x 0.5" plastic packages, DLV’s offer a number of
functional options (positive or negative polarity on the control pin, addition of second
VOUT trim pin, etc.) that make them pin compatible with, yet more powerful than,
virtually all 2" x 2" duals from other leading DC/DC manufacturers.
Assembled using fully automated, SMT-on-pcb techniques, DLV’s provide
stable no-load operation, excellent line/load regulation (±1%), quick step response
(200sec), and low output ripple/noise (80mVp-p). All devices feature full I/O fault
protection including: input overvoltage and undervoltage shutdown, output overvolt-
age protection, current limiting, short-circuit protection, and thermal shutdown.
All DLV models are Qual/HALT/EMI tested and certied to the operational/func-
tional-insulation requirements of UL60950/EN60950. 48VIN models (75VIN max.)
carry the CE mark
Two independently regulated outputs:
3.3V @ 6A; 2.5/1.8/1.5 @ 7A
13A/37W total output current/power
Input voltage ranges:
10-18V, 18-36V or 36-75V
Standard 2" x 2" package/pinout
High efciency (to 85%)
Stable no-load operation
Independent VOUT trim pins
Remote on/off control
Fully isolated (1500Vdc); I/O protected
Output overvoltage protection
Thermal shutdown
UL60950/EN60950 certied
CE marked
–INPUT
PWM
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR AMP
SWITCH
CONTROL
V2 OUTPUT
SWITCH
CONTROL
OUTPUT
RETURN
V1 OUTPUT
V1 TRIM
(OPTION)
V2 TRIM
+INPUT
SYNC
(OPTION)
ON/OFF
CONTROL
INPUT UNDERVOLTAGE
AND OVERVOLTAGE
COMPARATORS
PWM
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR AMP
Contact DATEL.
V1 is the higher of the
two output voltages.
A SUBSIDIARY OF C&D TECHNOLOGIES
PRELIMINARY