Specification
(25°C and Vs ± 15 Vdc)
D78 & DP78 Series
Pin-Out and Package Data
Ordering Information
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
IN-00D78-00
Filter Type
L
- Low Pass
H
- High Pass
Analog Input Characteristics
Impedance
Voltage Range
Max. Safe Voltage
1
10 k
W
min.
± 10 Vpeak
± Vs
Analog Output Characteristics
Impedance
Linear Operating Range± 10 V
Maximum Current
1
W
2
D78
DP78 ± 5 mA
20 mV max.
1
3 mV typ.
20
m
V / °C typ.
± 10 mA
Offset Voltage
Offset Temp. Coeff.
Power Supply (±V)
Rated Voltage
Operating Range
Maximum Safe Voltage ± 18 Vdc
Quiescent Current
D78
± 15 Vdc
± 5 to ± 18 Vdc
12 mA max.
8 mA typ.
Quiescent Current
DP78
2.5 mA max.
1.5 mA typ.
Temperature
Operating
Storage
-
0 to + 70 °C
- 25 to + 85 °C
Notes:
1. Input and output signal voltage referenced to
supply common.
2. Output is short circuit protected to common.
DO NOT CONNECT TO ±Vs.
Ordering Information
3. How to Specify Corner Frequency:
Corner frequencies are specified by attaching a three digit frequency designator to the
basic model number. Corner frequencies can range from 1 Hz to 100 kHz.
D78L8B-849 Hz
- 3 dB Corner Frequency
3
e.g., 849 Hz
2.50 kHz
33.3 kHz
Transfer Function
B
- Butterworth
L
- Bessel
Power Level
D
– Standard Power
DP
– Low Power
25 Locust St, Haverhill, Massachusetts 01830 Tel: 800/252-7074, 978/374-0761 FAX: 978/521-1839
e-mail: sales@freqdev.com Web Address: http://www.freqdev.com
3
Side View
0.80
0.025 dia.
All dimensions are in inches
All case dimensions
0.01"
Bottom View
+VS
OUT
-VS
IN
GND
0.80
0.70
0.10
0.00
0
0
0
0
1
1
1
0.15 (min)
Front View
0.30
1.80
0.50
Filter Mounting Assembly-See FMA-01A