參數資料
型號: DS87C530-ECL
廠商: Maxim Integrated Products
文件頁數: 19/45頁
文件大?。?/td> 0K
描述: IC MCU EPR/ROM W/RTC 33MZ 52TQFP
標準包裝: 96
系列: 87C
核心處理器: 8051
芯體尺寸: 8-位
速度: 33MHz
連通性: EBI/EMI,SIO,UART/USART
外圍設備: 電源故障復位,WDT
輸入/輸出數: 32
程序存儲器容量: 16KB(16K x 8)
程序存儲器類型: OTP
RAM 容量: 1K x 8
電壓 - 電源 (Vcc/Vdd): 4.5 V ~ 5.5 V
振蕩器型: 外部
工作溫度: 0°C ~ 70°C
封裝/外殼: 52-TQFP
包裝: 托盤
DS87C530/DS83C530 EPROM/ROM Microcontrollers with Real-Time Clock
26 of 45
read the PFI flag at WDCON.4. A PFI condition sets this bit to a 1. The flag is independent of the
interrupt enable and software must manually clear it. If the PFI is enabled and the bandgap select bit
(BGS) is set, a PFI will bring the device out of Stop mode.
WATCHDOG TIMER
To prevent software from losing control, the DS87C530/DS83C530 include a programmable watchdog
timer. The Watchdog is a free-running timer that sets a flag if allowed to reach a preselected timeout. It
can be (re)started by software.
A typical application is to select the flag as a reset source. When the Watchdog times out it sets its flag,
which generates reset. Software must restart the timer before it reaches its timeout or the processor is
reset.
Software can select one of four timeout values. Then, it restarts the timer and enables the reset function.
After enabling the reset function, software must then restart the timer before its expiration or hardware
will reset the CPU. Both the Watchdog Reset Enable and the Watchdog Restart control bits are protected
by a “Timed Access” circuit. This prevents errant software from accidentally clearing the Watchdog.
Timeout values are precise since they are a function of the crystal frequency as shown in Table 7. For
reference, the time periods at 33MHz also are shown.
The Watchdog also provides a useful option for systems that do not require a reset circuit. It will set an
interrupt flag 512 clocks before setting the reset flag. Software can optionally enable this interrupt source.
The interrupt is independent of the reset. A common use of the interrupt is during debug, to show
developers where the Watchdog times out. This indicates where the Watchdog must be restarted by
software. The interrupt also can serve as a convenient time-base generator or can wake-up the processor
from power saving modes.
The Watchdog function is controlled by the Clock Control (CKCON–8Eh), Watchdog Control
(WDCON–D8h), and Extended Interrupt Enable (EIE–E8h) SFRs. CKCON.7 and CKCON.6 are WD1
and WD0, respectively, and they select the Watchdog timeout period as shown in Table 7.
Table 7. Watchdog Timeout Values
WD1
WD0
INTERRUPT
TIMEOUT
TIME (33MHz)
RESET TIMEOUT
TIME (33MHz)
0
2
17 clocks
3.9718ms
2
17 + 512 clocks
3.9874ms
0
1
2
20 clocks
31.77ms
2
20 + 512 clocks
31.79ms
1
0
2
23 clocks
254.20ms
2
23 + 512 clocks
254.21ms
1
2
26 clocks
2033.60ms
2
26 + 512 clocks
2033.62ms
As shown above, the Watchdog Timer uses the crystal frequency as a time base. A user selects one of
four counter values to determine the timeout. These clock counter lengths are 2
17 = 131,072 clocks; 220 =
1,048,576; 2
23 = 8,388,608 clocks; and 226 = 67,108,864 clocks. The times shown in Table 7 are with a
33MHz crystal frequency. Once the counter chain has completed a full interrupt count, hardware will set
an interrupt flag. Regardless of whether the user enables this interrupt, there are then 512 clocks left until
the reset flag is set. Software can enable the interrupt and reset individually. Note that the Watchdog is a
free-running timer and does not require an enable.
相關PDF資料
PDF描述
1061541021 ADPT OPT MULTIMODE SC-ST BEIGE
1061541011 ADPT OPT MULTIMODE FC-SC BEIGE
DS80C323-ECD IC MCU HI SPEED 18MHZ 44-TQFP
MCF51JM128VLH IC MCU 128/16K FLASH/SRAM 64LQFP
MC908AP16CFBE IC MCU 16K FLASH 8MHZ 44QFP
相關代理商/技術參數
參數描述
DS87C530-ECL+ 功能描述:8位微控制器 -MCU EPROM MCU w/RTC RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
DS87C530-ENL 功能描述:8位微控制器 -MCU EPROM MCU w/RTC RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
DS87C530-ENL+ 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS87C530-KCL 功能描述:8位微控制器 -MCU EPROM MCU w/RTC RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT