<dl id="rc7vu"><video id="rc7vu"><sup id="rc7vu"></sup></video></dl>
  • <nobr id="rc7vu"><noframes id="rc7vu"><pre id="rc7vu"></pre>
    <ins id="rc7vu"></ins>
    <small id="rc7vu"><output id="rc7vu"></output></small>
    參數資料
    型號: DSC-10510-333
    英文描述: Converter
    中文描述: 轉換器
    文件頁數: 7/12頁
    文件大?。?/td> 110K
    代理商: DSC-10510-333
    7
    Data Device Corporation
    www.ddc-web.com
    DSC-10510
    H-02/02-250
    momentary 45
    °
    kick
    to the torque receiver thus knocking it off
    the false null. The torque receiver will then swing to the correct
    angle and properly null. If the torque receiver is stuck it will not
    be able to swing off the over-current condition. In this case the
    converter will send a BIT signal when the case temperature
    exceeds 140
    °
    C. This BIT signal can be used to shut down the
    output power stage.
    An additional advantage of using pulsating power supplies is that
    the loss of reference when driving torque loads is fail safe. The
    load will pump up the ±V voltage through the power stage clamp
    diodes and the loss of the reference detector will disable the
    power stage.The power stage will be turned off with the required
    power supply voltages. The pulsating power supply diodes will
    isolate the pumped up pulsating supplies from the reference. If
    the DC power supplies are to be used for the power stage, and
    there is a possibility of the DC supplies being off while the refer-
    ence to the torque receiver is on, then the protection circuitry
    shown in Figure 11 is highly recommended.
    A remote sense feature is incorporated in DDC
    s DSC-10510
    hybrid digital-to-synchro converter. Rated at 7 VA, it offers accu-
    racies to ±2 minutes of arc at the load.This remote sense feature
    operates just as other precision sources do. A separate line is
    run to each leg of the synchro (in addition to the drive line) to
    sense the voltage actually appearing on the load. This is then
    used to regulate the output based on load voltage rather than
    converter output voltage. This feature is very useful in driving
    heavy passive loads in precision systems.
    2
    D/S
    2
    10.2V
    +15V
    10.2V
    - 15V
    FIGURE 10.WORST CASE 180° ERROR
    D/S
    +V
    -V
    +
    -V
    +15VDC
    -15VDC
    FIGURE 11. PROTECTION CIRCUITRY
    200 ns min.
    LATCHED
    DATA 1-16 BITS
    100 ns min.
    50 ns min.
    TRANSPARENT
    FIGURE 12. LL, LM, LA TIMING DIAGRAM
    相關PDF資料
    PDF描述
    DSC-10510-333L Converter
    DSC-10510-333Q Converter
    DSC-10510-333S Converter
    DSC-10510-334 Converter
    DSC-10510-334L Converter
    相關代理商/技術參數
    參數描述
    DSC-10510-333L 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Converter
    DSC-10510-333Q 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Converter
    DSC-10510-333S 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Converter
    DSC-10510-334 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Converter
    DSC-10510-334L 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Converter