參數資料
型號: E1L51-BC1AC-03
廠商: MARL INTERNATIONAL LTD
元件分類: LED
英文描述: T-1 3/4 SINGLE COLOR LED, BLUISH GREEN, 5 mm
封裝: LEAD FREE PACKAGE-2
文件頁數: 4/5頁
文件大小: 523K
代理商: E1L51-BC1AC-03
Soldering
Conditions
When soldering, leave the minimum clearance between bottom the resin and the soldering point.
Maximum allowable soldering conditions are:
Solder dipping: 260 degrees C max., 5 seconds max., one time.
Soldering iron: 350 degrees C max., 5 seconds max., one time, power 40W max.
Contact between molten solder and the resin must be avoided.
Adjusting the soldered position after soldering must be avoided.
In soldering, do not put any stress on the lead frame, particularly when heated.
When other SMD parts on the same circuit board and adhesive are to be cured, maximum allowable conditions are :
120 degrees C max., 60 seconds max.
Lead frame
forming and
cut
Lead frame forming must be done below the tie bar cutting position.
When forming a lead frame, do not put stress on the resin case.
Forming must be done before soldering.
Cutting the lead frame at high temperature may cause problems. Cut the lead frame at room temperature.
Assembly
Do not put any stress on the lead frame while assembling.
When mounting Products onto boards such as printed wired board, the pitch between the two holes of such boards must the pitch of the lead
frames.
Static
Electricity
These products are sensitive to static electricity charge and users are required to handle with care. Particularly, if an current and or voltage
which exceeds the Absolute Maximum Rating of Products is applied, the overflow in energy may cause damage to, or possibly result in
electrical destruction of, the Products. The customer is requested to take adequate countermeasures against static electricity charge and
surge when handling Products.
A protection device should be installed in the LED driving circuit, which does not exceed the absolute maximum rating for surge current
during on/ off switching.
Proper grounding of Products (interposing 1M
) , use of conductive mat, conductive working uniform and shoes, and conductive
containers are effective against static electricity and surge.
When on electrified machine or product touches the low resistance part such as a metal surface, there is a high possibility that it may be
damaged due to sudden electric discharge. Ground low-resistance areas where the product confects, such as metal surfaces of the work
platform, with a conductive mat (surface resistance 10-10 )
A tip of soldering iron is requested to be grounded. An ionizer should also be installed where risk of static generation is high.
If the countermeasures mentioned above are implemented, the LED can be used without problems. If problems are caused by static
electricity please confirm whether these countermeasures have been property carried out.
Safety
Precautions
Users are requested to comply with the laws and public regulations concerning safety.
The light output of the Products may cause injuries to human eyes in circumstances where the Products are viewed directly for
more than a few seconds
CAUTION
Round
Lamp/
Mono
相關PDF資料
PDF描述
E1L51-SC1AY-03 T-1 3/4 SINGLE COLOR LED, BLUISH GREEN, 5 mm
E1L52-SC1AF-03 T-1 3/4 SINGLE COLOR LED, BLUISH GREEN, 5 mm
E1L53-SC1AL-03 T-1 3/4 SINGLE COLOR LED, BLUISH GREEN, 5 mm
E1S40-0P0C6-01 SINGLE COLOR LED, PURPLE, 2.4 mm
E1SAA18-16.500M QUARTZ CRYSTAL RESONATOR, 16.5 MHz
相關代理商/技術參數
參數描述
E1L51-YC1A2-03 制造商:MARL International Limited 功能描述:LED 5MM R 6DEG BLUE/GREEN
E1L51-YC1A2-03 制造商:MARL International Limited 功能描述:LED 5MM BLUE/GREEN
E1L52-YC1A2-03 制造商:MARL International Limited 功能描述:LED 5MM R 23DEG BLUE/GREEN
E1L52-YC1A2-03 制造商:MARL International Limited 功能描述:LED 5MM BLUE/GREEN
E1L53-3B0A2-02 制造商:MARL International Limited 功能描述:LED 5MM R 25DEG BLUE