參數資料
型號: EFM32-TG-STK3300
廠商: Energy Micro
文件頁數: 5/136頁
文件大?。?/td> 0K
描述: KIT STARTER EFM32 GECKO
特色產品: EFM32 Tiny Gecko
標準包裝: 1
系列: EFM®32
類型: MCU
適用于相關產品: EFM32-TGXXX
所含物品: 板,線纜,CD 和文檔
其它名稱: 914-1018
...the world's most energy friendly microcontrollers
2011-02-04 - d0002_Rev1.00
102
www.energymicro.com
Bits
Name
Function
On exception entry, the processor uses bit[9] of the stacked PSR to indicate the
stack alignment. On return from the exception it uses this stacked bit to restore the
correct stack alignment.
[8]
BFHFNMIGN
Enables handlers with priority -1 or -2 to ignore data bus faults caused by load and
store instructions. This applies to the hard fault, NMI, and FAULTMASK escalated
handlers:
0 = data bus faults caused by load and store instructions cause a lock-up
1 = handlers running at priority -1 and -2 ignore data bus faults caused by load and
store instructions.
Set this bit to 1 only when the handler and its data are in absolutely safe memory.
The normal use of this bit is to probe system devices and bridges to detect control
path problems and fix them.
[7:5]
-
Reserved.
[4]
DIV_0_TRP
Enables faulting or halting when the processor executes an SDIV or UDIV
instruction with a divisor of 0:
0 = do not trap divide by 0
1 = trap divide by 0.
When this bit is set to 0,a divide by zero returns a quotient of 0.
[3]
UNALIGN_TRP
Enables unaligned access traps:
0 = do not trap unaligned halfword and word accesses1 = trap unaligned halfword
and word accesses.
If this bit is set to 1, an unaligned access generates a usage fault.
Unaligned LDM, STM, LDRD, and STRD instructions always fault irrespective of
whether UNALIGN_TRP is set to 1.
[2]
-
Reserved.
[1]
USERSETMPEND
Enables unprivileged software access to the STIR, see Section 4.2.8 (p. 93) :
0 = disable1 = enable.
[0]
NONEBASETHRDENA
Indicates how the processor enters Thread mode:
0 = processor can enter Thread mode only when no exception is active.
1 = processor can enter Thread mode from any level under the control of an
EXC_RETURN value, see Section 2.3.7.2 (p. 27) .
4.3.9 System Handler Priority Registers
The SHPR1-SHPR3 registers set the priority level, 0 to 7 of the exception handlers that have configurable
priority.
SHPR1-SHPR3 are byte accessible. See the register summary in Table 4.12 (p. 94) for their
attributes.
The system fault handlers and the priority field and register for each handler are:
Table 4.21. System fault handler priority fields
Handler
Field
Register description
Memory management fault
PRI_4
Bus fault
PRI_5
Usage fault
PRI_6
SVCall
PRI_11
PendSV
PRI_14
相關PDF資料
PDF描述
HSC08DRYH-S13 CONN EDGECARD 16POS .100 EXTEND
TH3D336M016A0600 CAP TANT 33UF 16V 20% 2917
GBA18DTKT-S288 CONN EDGECARD 36POS .125 EXTEND
RSM03DRKN CONN EDGECARD 6POS DIP .156 SLD
GBA22DRMI-S288 CONN EDGECARD 44POS .125 EXTEND
相關代理商/技術參數
參數描述
EFM32TG-STK3300 制造商:Energy Micro AS 功能描述:STARTER KIT STK3300 TINY GEC 制造商:Energy Micro AS 功能描述:STARTER KIT, STK3300, TINY GECKO; Silicon Manufacturer:Energy Micro; Core Architecture:ARM; Core Sub-Architecture:Cortex-M3; Silicon Core Number:EFM32TG840; Silicon Family Name:EFM32; Kit Contents:Starter Kit EFM32TG840; SVHC:No SVHC;RoHS Compliant: Yes
EFM32WG230F128 功能描述:ARM微控制器 - MCU 128kb flash 32kb RAM RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 處理器系列:STM32F373xx 數據總線寬度:32 bit 最大時鐘頻率:72 MHz 程序存儲器大小:256 KB 數據 RAM 大小:32 KB 片上 ADC:Yes 工作電源電壓:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:LQFP-48 安裝風格:SMD/SMT
EFM32WG230F128-QFN64 制造商:Energy Micro AS 功能描述:32 BIT ARM MPU, WONDER GECKO - Tape and Reel 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 128KB FLASH 64QFN
EFM32WG230F128-QFN64T 制造商:Energy Micro AS 功能描述:WONDER GECKO 32 BIT ARM CORTEX MCU - Trays
EFM32WG230F128-QFN64-T 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 128KB FLASH 64QFN