1
FN7013.3
EL1507
Medium Power Differential Line Driver
The EL1507 is a very low power dual operational amplifier
designed for central office and customer premise line driving
for DMT ADSL solutions. This device features a high drive
capability of 400mA while consuming only 7.5mA of supply
current per amplifier from ±12V supplies. This driver
achieves a typical distortion of less than -75dBc, at 1MHz
into a 50
Ω load. The EL1507 is available in the thermally-
enhanced 16 Ld SO package, as well as a 16 Ld QFN
package. Both are specified for operation over the full
-40°C to +85°C temperature range.
The EL1507 has two control pins, C0 and C1. With the
selection of C0 and C1, the device can be set into full-IS
power, -IS power, -IS power, and power down disable
modes. The EL1507 maintains excellent distortion and load
driving capabilities even in the lowest power settings.
Features
Drives 360mA at 16VP-P on ±12V supplies
40VP-P differential output drive into 100Ω
-75dBc typical driver output distortion driving 50
Ω at 1MHz
and 1/2-IS bias current
Low quiescent current of 3.5mA per amplifier in 1/2-IS
mode
Power down disable mode
Pb-free plus anneal available (RoHS compliant)
Applications
ADSL G.DMT and G.lite CO line driving
G.SHDSL, HDSL2 line driver
ADSL CPE line driving
Video distribution amplifier
Video twisted-pair line driver
Ordering Information
PART NUMBER
PART
MARKING
TAPE &
REEL
PACKAGE
PKG.
DWG. #
EL1507CS
-
16 Ld SOIC MDP0027
EL1507CS-T7
EL1507CS
7”
16 Ld SOIC MDP0027
EL1507CS-T13
EL1507CS
13”
16 Ld SOIC MDP0027
EL1507CSZ
(See Note)
EL1507CSZ
-
16 Ld SOIC
(Pb-Free)
MDP0027
EL1507CSZ-T7
(See Note)
EL1507CSZ
7”
16 Ld SOIC
(Pb-Free)
MDP0027
EL1507CSZ-T13
(See Note)
EL1507CSZ
13”
16 Ld SOIC
(Pb-Free)
MDP0027
EL1507CL
1507CL
-
16 Ld QFN
MDP0046
EL1507CL-T7
1507CL
7”
16 Ld QFN
MDP0046
EL1507CL-T13
1507CL
13”
16 Ld QFN
MDP0046
EL1507CLZ
(See Note)
1507CLZ
-
16 Ld QFN
(Pb-Free)
MDP0046
EL1507CLZ-T7
(See Note)
1507CLZ
7”
16 Ld QFN
(Pb-Free)
MDP0046
EL1507CL-T13
(See Note)
1507CLZ
13”
16 Ld QFN
(Pb-Free)
MDP0046
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Data Sheet
March 26, 2007
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005-2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.