- 您現在的位置：買賣IC網 > PDF目錄5332 > EL5106IW-T7 (Intersil)IC OP AMP HS VF 350MHZ SOT23-6 PDF資料下載
參數資料
| 型號： | EL5106IW-T7 |
| 廠商： | Intersil |
| 文件頁數： | 13/13頁 |
| 文件大小： | 0K |
| 描述： | IC OP AMP HS VF 350MHZ SOT23-6 |
| 標準包裝： | 1 |
| 放大器類型： | 通用 |
| 電路數： | 1 |
| 轉換速率： | 4500 V/µs |
| -3db帶寬： | 380MHz |
| 電流 - 輸入偏壓： | 1.5µA |
| 電壓 - 輸入偏移： | 1000µV |
| 電流 - 電源： | 1.5mA |
| 電流 - 輸出 / 通道： | 100mA |
| 電壓 - 電源，單路/雙路(±)： | 5 V ~ 12 V，±2.5 V ~ 6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | SOT-23-6 |
| 供應商設備封裝： | SOT-23-6 |
| 包裝： | 標準包裝 |
| 產品目錄頁面： | 1233 (CN2011-ZH PDF) |
| 其它名稱： | EL5106IW-T7DKR |
9
FN7357.7
June 6, 2012
Current Limiting
The EL5106 and EL5306 have no internal current-limiting
circuitry. If the output is shorted, it is possible to exceed the
Absolute Maximum Rating for output current or power
dissipation, potentially resulting in the destruction of the
device.
Power Dissipation
With the high output drive capability of the EL5106 and
EL5306, it is possible to exceed the +125°C Absolute
Maximum junction temperature under certain very high load
current conditions. Generally speaking when RL falls below
about 25
Ω, it is important to calculate the maximum junction
temperature (TJMAX) for the application to determine if
power supply voltages, load conditions, or package type
need to be modified for the EL5106 and EL5306 to remain in
the safe operating area. These parameters are calculated as
shown in Equation 1:
where:
TMAX = Maximum ambient temperature
θJA = Thermal resistance of the package
n = Number of amplifiers in the package
PDMAX = Maximum power dissipation of each amplifier in
the package
PDMAX for each amplifier can be calculated as shown in
Equation 2:
where:
VS = Supply voltage
ISMAX = Maximum bias supply current
VOUTMAX = Maximum output voltage (required)
RL = Load resistance
T
JMAX
T
MAX
θ
JA
nPD
MAX
×
()
+
=
(EQ. 1)
PD
MAX
2
(
V
S
I
SMAX )
V
S
(
- V
OUTMAX )
V
OUTMAX
R
L
----------------------------
×
+
×
=
(EQ. 2)
Revision History
DATE
REVISION
CHANGE
April 25, 2012
FN7357.7
Removed obsolete part EL5106IS from “Order Information” page 1.
Corrected Pkg Dwg # in “Order Information” page 1 for EL5306ISZ parts from M8.15E to
MDP0027.
Changed Min/Max limits for “VOS” on page 3 from -10/10mV to -15/15mV. Added “Output
offset voltage including Ib*RF term” to conditions column. Changed Description from “Offset
Voltage” to “Specified Offset Voltage”.
Added package outline drawing MDP0027 to page 13.
June 4, 2009
FN7357.6
Removed obsolete, leaded devices EL5106IW-T7, EL5106IW-T7A; EL5106IS-T7, EL5106IS-
T13; EL5306IS, EL5306IS-T7, EL5306IS-T13; EL5306IU, EL5306IU-T7, EL5306IU-T13
Corrected Figure references in “Gain Setting” on page 7 (Fig 14 callout was referencing Fig
13; Fig 15 callout was referencing Fig 14; Fig 16 callout was referencing Fig 15) .
Updated pin descriptions to match pin names of EL5306.
Applied Intersil Standards: Updated Pb-free bullet in Features, Updated ordering information
by removing tape and reel column and adding standard reference note and updating note to
match lead finish, updated caution statement to legal's suggested verbiage. Changed date
and Rev'd to 6.
Updated Package Outline Drawing MDP0038 toP6.064A - P6.064A replaces 6 Ld SOT-23
(same dimensions, just MDP0038 had both 5 & 6 Ld SOT23s w/dimensions listed in table)
Updated Package Outline Drawing MDP0027 to M8.15E - M8.15E replaces MDP0027 8 Ld
SOIC (same dimensions, just MDP0027 had 8, 14, 16, 20, 24, 28 Ld SOICS with dimensions
listed in table)
P1, added Note 3 "The part marking is located on the bottom of the part" for SOT-23 package
Added Revision History table.
EL5106, EL5306
相關PDF資料 |
PDF描述 |
|---|---|
| B1160CALRP | BATTRAX SLIC SGL NEG 50A DO214 |
| 2040.0609 | FUSE 250MA 250VAC RADIAL SLOW |
| TZZ11 | KNURLED NUT CIRCUIT BRKR NICKEL |
| P1701CA2LRP | SIDACTOR SLIC UNI 160V 50A DO214 |
| SFM210-LPSE-D06-ST-BK | CONN HDR FMAL 12POS 1MM GOLD T/H |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EL5106IW-T7A | 功能描述:IC OP AMP HS VF 300MHZ SOT-23-6 RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:1,000 系列:- 放大器類型:電壓反饋 電路數:4 輸出類型:滿擺幅 轉換速率:33 V/µs 增益帶寬積:20MHz -3db帶寬:30MHz 電流 - 輸入偏壓:2nA 電壓 - 輸入偏移:3000µV 電流 - 電源:2.5mA 電流 - 輸出 / 通道:30mA 電壓 - 電源，單路/雙路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOIC 包裝:帶卷 (TR) |
| EL5106IWZ-T7 | 功能描述:高速運算放大器 EL5106IWZ SINGLE 300 MHZ FGAW ENABLE RoHS:否 制造商:Texas Instruments 通道數量:1 電壓增益 dB:116 dB 輸入補償電壓:0.5 mV 轉換速度:55 V/us 工作電源電壓:36 V 電源電流:7.5 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube |
| EL5106IWZ-T7A | 功能描述:高速運算放大器 EL5106IWZ SINGLE 300 MHZ FGAW ENABLE RoHS:否 制造商:Texas Instruments 通道數量:1 電壓增益 dB:116 dB 輸入補償電壓:0.5 mV 轉換速度:55 V/us 工作電源電壓:36 V 電源電流:7.5 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube |
| EL5108 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
| EL5108_06 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
發布緊急采購，3分鐘左右您將得到回復。