1
FN7357.7
EL5106, EL5306
350MHz Fixed Gain Amplifiers with Enable
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25A typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
The EL5106 is offered in the 6 Ld SOT-23 and the
industry-standard 8 Ld SOIC packages and the EL5306 is
available in the 16 Ld SOIC and 16 Ld QSOP packages. All
operate over the industrial temperature range of -40°C to
+85°C.
Features
Pb-free available (RoHS compliant)
Gain selectable (+1, -1, +2)
350MHz -3dB BW (AV = 2)
1.5mA supply current per amplifier
Fast enable/disable
Single and dual supply operation, from 5V to 12V
Available in SOT-23 packages
450MHz, 3.5mA product available (EL5108 and EL5308)
Applications
Battery powered equipment
Handheld, portable devices
Video amplifiers
Cable drivers
RGB amplifiers
Ordering Information
PART NUMBER
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
EL5106IWZ-T7 (Notes
1, 2)
6 Ld SOT-23
P6.064A
EL5106IWZ-T7A (Notes
1, 2)6 Ld SOT-23
P6.064A
5106ISZ
8 Ld SOIC (150 mil)
M8.15E
EL5106ISZ-T7 (Notes
1, 2)
5106ISZ
8 Ld SOIC (150 mil)
M8.15E
EL5106ISZ-T13 (Notes
1, 2)5106ISZ
8 Ld SOIC (150 mil)
M8.15E
EL5306ISZ
16 Ld SOIC (150 mil)
MDP0027
EL5306ISZ-T7 (Notes
1, 2)
EL5306ISZ
16 Ld SOIC (150 mil)
MDP0027
EL5306ISZ-T13 (Notes
1, 2)EL5306ISZ
16 Ld SOIC (150 mil)
MDP0027
5306IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5306IUZ-T7 (Notes
1, 2)5306IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5306IUZ-T13 (Notes
1, 2)5306IUZ
16 Ld QSOP (150 mil)
MDP0040
NOTES:
1. Please refer to
TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
3. The part marking is located on the bottom of the part.
4. For Moisture Sensitivity Level (MSL), please see device information page for
EL5106, EL5306. For more information on MSL please see tech
Data Sheet
June 6, 2012
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2002-2005, 2007, 2010, 2012. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.