- 您現在的位置：買賣IC網 > PDF目錄3381 > EL5164ISZ-T13 (Intersil)IC AMP CFA SGL 600MHZ 8-SOIC PDF資料下載
參數資料
| 型號： | EL5164ISZ-T13 |
| 廠商： | Intersil |
| 文件頁數： | 17/17頁 |
| 文件大小： | 0K |
| 描述： | IC AMP CFA SGL 600MHZ 8-SOIC |
| 標準包裝： | 2,500 |
| 放大器類型： | 電流反饋 |
| 電路數： | 1 |
| 轉換速率： | 4700 V/µs |
| -3db帶寬： | 600MHz |
| 電流 - 輸入偏壓： | 2µA |
| 電壓 - 輸入偏移： | 1500µV |
| 電流 - 電源： | 3.5mA |
| 電流 - 輸出 / 通道： | 190mA |
| 電壓 - 電源，單路/雙路(±)： | 5 V ~ 12 V，±2.5 V ~ 6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 帶卷 (TR) |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁當前第17頁
EL5164, EL5165, EL5364
9
FN7389.9
January 30, 2014
Applications Information
Product Description
The EL5164, EL5165, and EL5364 are current-feedback operational
amplifiers that offer a wide -3dB bandwidth of 600MHz and a low
supply current of 3.5mA per amplifier. The EL5164, EL5165, and
EL5364 work with supply voltages ranging from a single 5V to 10V
and they are also capable of swinging to within 1V of either supply
on the output. Because of their current-feedback topology, the
EL5164, EL5165, and EL5364 do not have the normal gain-
bandwidth product associated with voltage-feedback operational
amplifiers. Instead, their -3dB bandwidth remains relatively
constant as closed-loop gain increases. This combination of high
bandwidth and low power, together with aggressive pricing makes
the EL5164, EL5165, and EL5364 ideal choices for many low-
power/high-bandwidth applications such as portable, handheld, or
battery-powered equipment. For varying bandwidth needs, consider
the EL5166 and EL5167 with 1.4GHz bandwidth and an 8.5mA
supply current, or the EL5162 and EL5163 with 500MHz bandwidth
and a 1.5mA supply current. Versions include single, dual, and triple
amp configurations with 5 Ld SOT-23, 16 Ld QSOP, and 8 Ld SOIC
or 16 Ld SOIC outlines.
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high frequency device, good printed circuit board
layout is necessary for optimum performance. Low impedance
ground plane construction is essential. Surface mount
components are recommended, but if leaded components are
used, lead lengths should be as short as possible. The power
supply pins must be well bypassed to reduce the risk of
oscillation. The combination of a 4.7F tantalum capacitor in
parallel with a 0.01F capacitor has been shown to work well
when placed at each supply pin.
For good AC performance, parasitic capacitance should be kept
to a minimum, especially at the inverting input. (See the
ground plane construction is used, it should be removed from the
area near the inverting input to minimize any stray capacitance
at that node. Carbon or Metal-Film resistors are acceptable with
the Metal-Film resistors giving slightly less peaking and
bandwidth because of additional series inductance. Use of
sockets, particularly for the SO package, should be avoided if
possible. Sockets add parasitic inductance and capacitance
which results in additional peaking and overshoot.
Pin Descriptions
EL5164
(8 Ld SOIC)
EL5164
(6 Ld SOT-23)
EL5165
EL5364
Pin Name
Function
Equivalent Circuit
1, 5
6, 11
NC
Not connected
2
4
9, 12, 16
IN-
Inverting input
CIRCUIT 1
3
1, 5, 8
IN+
Non-inverting input
(See circuit 1)
4
2
3
VS-
Negative supply
61
1
10, 13,
15
OUT
Output
CIRCUIT 2
7
6
5
14
VS+
Positive supply
8
5
2, 4, 7
CE
Chip enable, allowing the
pin to float or applying a
low logic level enables the
corresponding amplifier.
CIRCUIT 3
IN-
IN+
VS+
VS-
VS+
VS-
OUT
VS+
VS-
CE
INTERNAL 0V
0.5M
Ω
相關PDF資料 |
PDF描述 |
|---|---|
| EL5173IYZ-T7 | IC DRVR TWISTED 450MHZ SGL 8MSOP |
| 961248-6700-AR-PR | CONN HEADER STR DL 48PS GOLD SMD |
| 81020-600303 | CONN HEADER 20POS STR THRU HOLE |
| 81020-600203 | CONN HEADER 20POS STR THRU HOLE |
| 81020-600201 | CONN HEADER 20POS STR THRU HOLE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EL5164ISZ-T7 | 功能描述:高速運算放大器 EL5164ISZ SINGLE 850 850MHZ CFAW ENABLE RoHS:否 制造商:Texas Instruments 通道數量:1 電壓增益 dB:116 dB 輸入補償電壓:0.5 mV 轉換速度:55 V/us 工作電源電壓:36 V 電源電流:7.5 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube |
| EL5164IW-T7 | 功能描述:運算放大器 - 運放 600MHZ CURR FB RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比（最小值）:63 dB 輸入補償電壓:1 mV 輸入偏流（最大值）:10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel |
| EL5164IW-T7A | 功能描述:運算放大器 - 運放 850 MHz CFA w Enable RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比（最小值）:63 dB 輸入補償電壓:1 mV 輸入偏流（最大值）:10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel |
| EL5164IWZ-T7 | 功能描述:高速運算放大器 EL5164IWZ SINGLE 850 850MHZ CFAW ENABLE RoHS:否 制造商:Texas Instruments 通道數量:1 電壓增益 dB:116 dB 輸入補償電壓:0.5 mV 轉換速度:55 V/us 工作電源電壓:36 V 電源電流:7.5 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube |
| EL5164IWZ-T7A | 功能描述:高速運算放大器 EL5164IWZ SINGLE 850 850MHZ CFAW ENABLE RoHS:否 制造商:Texas Instruments 通道數量:1 電壓增益 dB:116 dB 輸入補償電壓:0.5 mV 轉換速度:55 V/us 工作電源電壓:36 V 電源電流:7.5 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。