4–86
Altera Corporation
Stratix II GX Device Handbook, Volume 2
October 2007
GIGE Mode
What is the receiver
termination resistance?
This option selects the receiver termination value.
The settings allowed are 100
Ω , 120 Ω , and 150 Ω .
Receiver Buffer section in
volume 2 of the
Stratix II GX Device
Handbook.
Use calibration block
This option allows you to select which instance of
ALT2GXB instantiates the calibration block. Only one
instance of ALT2GXB is required to instantiate the
calibration block.
Calibration Blocks
section in the
chapter in volume 2 of the
Stratix II GX Device
Handbook.
Create
cal_blk_powerdown
to
power down the calibration
block
Overview chapter in volume 2 of the Stratix II GX
Device Handbook for information about this port.
Calibration Blocks
section in the
chapter in volume 2 of the
Stratix II GX Device
Handbook.
Table 4–29. MegaWizard Plug-In Manager Options (Page 5 for GIGE Mode) (Part 2 of 2)
ALT2GXB Setting
Description
Reference