- 您現在的位置：買賣IC網 > PDF目錄19912 > EPC1LC20N (Altera)IC CONFIG DEVICE 1MBIT 20-PLCC PDF資料下載
參數資料
| 型號： | EPC1LC20N |
| 廠商： | Altera |
| 文件頁數： | 5/26頁 |
| 文件大小： | 0K |
| 描述： | IC CONFIG DEVICE 1MBIT 20-PLCC |
| 產品培訓模塊： | Three Reasons to Use FPGA's in Industrial Designs |
| 標準包裝： | 588 |
| 系列： | EPC |
| 可編程類型： | OTP |
| 存儲容量： | 1Mb |
| 電源電壓： | 3 V ~ 3.6 V，4.75 V ~ 5.25 V |
| 工作溫度： | 0°C ~ 70°C |
| 封裝/外殼： | 20-LCC（J 形引線） |
| 供應商設備封裝： | 20-PLCC（9x9） |
| 包裝： | 管件 |
| 配用： | PLMJ1213-ND - PROGRAMMER ADAPTER 20 PIN J-LEAD |
| 其它名稱： | 544-1934 544-1934-5 544-1934-ND EPC1LC20N-ND |
Programming and Configuration File Support
Page 13
Configuration Devices for SRAM-Based LUT Devices
January 2012
Altera Corporation
Table 5 lists the programming adapter to use with each configuration device.
To program Altera configuration devices using the Quartus II software and the APU,
follow these steps:
1. Choose the Quartus II Programmer (Tools menu).
2. Load the appropriate .pof by clicking Add. The Device column displays the
device for the current programming file.
3. Insert a blank configuration device into the programming adapter’s socket.
4. Turn on the Program/Configure. You can also turn on Verify to verify the contents
of a programmed device against the programming data loaded from a
programming file.
5. Click Start.
6. After successful programming, you can place the configuration device on the PCB
to configure the FPGA device.
To program Altera configuration devices using the MAX+PLUS II software and the
APU, follow these steps:
1. Open the MAX+PLUS II Programmer.
2. Load the appropriate .pof using the Select Programming File dialog box (File
menu). By default, the Programmer loads the current project’s .pof. The Device
field displays the device for the current programming file.
3. Insert a blank configuration device into the programming adapter’s socket.
4. Click Program.
5. After successful programming, you can place the configuration device on the PCB
to configure the FPGA device.
If you are cascading EPC1 or EPC2 devices, you must generate multiple .pof. The first
device .pof have the same name as the project, while the second device .pof have the
same name as the first, but with a “_1” extension (e.g., top_1.pof).
Table 5. Programming Adapters
Device
Package
Adapter
EPC2
20
-pin J-Lead
PLMJ1213
32-pin TQFP
PLMT1213
EPC1
8-pin DIP
PLMJ1213
20-pin J-Lead
PLMJ1213
EPC1441
8-pin DIP
PLMJ1213
20-pin J-Lead
PLMJ1213
32-pin TQFP
PLMT1064
相關PDF資料 |
PDF描述 |
|---|---|
| ACB106DHHD-S621 | CONN EDGECARD 212PS .05" DIP SLD |
| NCV4279BDWG | IC REG LDO 5V .15A 20-SOIC |
| LT4254IGN#TRPBF | IC CTLR HOTSWAP POS 16-SSOP |
| AT17LV002-10CU | IC SRL CONFIG EEPROM 2M 8-LAP |
| EBC05DRTH-S734 | CONN EDGECARD 10POS DIP .100 SLD |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EPC1LI20 | 功能描述:FPGA-配置存儲器 IC - Ser. Config Mem Flash 1Mb 8 MHz RoHS:否 制造商:Altera Corporation 存儲類型:Flash 存儲容量:1.6 Mbit 工作頻率:10 MHz 電源電壓-最大:5.25 V 電源電壓-最小:3 V 電源電流:50 uA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:PLCC-20 |
| EPC1LI-20 | 制造商:Altera Corporation 功能描述: |
| EPC1LI20N | 功能描述:FPGA-配置存儲器 IC - Ser. Config Mem Flash 1Mb 8 MHz RoHS:否 制造商:Altera Corporation 存儲類型:Flash 存儲容量:1.6 Mbit 工作頻率:10 MHz 電源電壓-最大:5.25 V 電源電壓-最小:3 V 電源電流:50 uA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:PLCC-20 |
| EPC1PC8 | 功能描述:FPGA-配置存儲器 IC - Ser. Config Mem Flash 1Mb 8 MHz RoHS:否 制造商:Altera Corporation 存儲類型:Flash 存儲容量:1.6 Mbit 工作頻率:10 MHz 電源電壓-最大:5.25 V 電源電壓-最小:3 V 電源電流:50 uA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:PLCC-20 |
| EPC1PC8 | 制造商:Altera Corporation 功能描述:IC SRAM 1MBIT 8PDIP |
發(fā)布緊急采購，3分鐘左右您將得到回復。