![](http://datasheet.mmic.net.cn/170000/EPSA23BBHA-60-000M_datasheet_8700572/EPSA23BBHA-60-000M_1.png)
Pb
RoHS
EPSA23BBHA-60.000M
EPSA23 B B H A -60.000M
Series
RoHS Compliant (Pb-free) 3.3V 4 Pad 3.2mm x 5mm
Ceramic SMD LVCMOS Programmable Spread
Spectrum Oscillator
Frequency Tolerance/Stability
±50ppm Maximum
Operating Temperature Range
-40°C to +85°C
Nominal Frequency
60.000MHz
Spread Spectrum
±0.25% Center Spread
Output Control Function
Tri-State
ELECTRICAL SPECIFICATIONS
Nominal Frequency
60.000MHz
Frequency Tolerance/Stability
±50ppm Maximum (Inclusive of all conditions: Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration.)
Operating Temperature Range
-40°C to +85°C
Supply Voltage
3.3Vdc ±10%
Maximum Supply Voltage
-0.5Vdc to +4.2Vdc
Input Current
27mA Maximum
Output Voltage Logic High (Voh)
90% of Vdd Minimum (IOH=-8mA)
Output Voltage Logic Low (Vol)
10% of Vdd Maximum (IOL=+8mA)
Rise/Fall Time
3nSec Maximum (Measured at 10% to 90% of Waveform)
Duty Cycle
50% ±5(%) (Measured at 50% of waveform)
Load Drive Capability
15pF Maximum
Output Logic Type
CMOS
Output Control Function
Tri-State (Disabled Output: High Impedance)
Tri-State Input Voltage (Vih and Vil)
70% of Vdd Minimum or No Connection to Enable Output, 30% of Vdd Maximum to Disable Output
Tri-State Output Disable Time
100nSec Maximum
Tri-State Output Enable Time
100nSec Maximum
Disable Current
20mA Maximum (Unloaded; Pad 1=Ground)
Spread Spectrum
±0.25% Center Spread
Modulation Frequency
30kHz Minimum, 32kHz Typical, 45kHz Maximum
Period Jitter
100pSec Maximum (Cycle to Cycle; Spread Spectrum-On)
Start Up Time
10mSec Maximum
Storage Temperature Range
-55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
Flammability
UL94-V0
Gross Leak Test
MIL-STD-883, Method 1014, Condition C
Mechanical Shock
MIL-STD-883, Method 2002, Condition B
Moisture Resistance
MIL-STD-883, Method 1004
Moisture Sensitivity
J-STD-020, MSL 1
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Resistance to Solvents
MIL-STD-202, Method 215
Solderability
MIL-STD-883, Method 2003
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Vibration
MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/13/2011 | Page 1 of 5