(0,50mm) .0197"
(0,80mm) .0315"
HQDP, EQDP SERIES
HQDP–020–06.00–SEU–TTL–2–F
EQDP–028–06.00–STR–TTL–3–B
Optional Captive Screw or
Screw Mount Option
Socket or
Terminal
30 AWG
twinax
ribbon cable
Differential Pair
routing
Surface
Mount or
Edge Mount
WWW.SAMTEC.COM
EQDP Mates with:
QTE-DP, QSE-DP
HQDP Mates with:
QTH-DP, QSH-DP
SPECIFICATIONS
END
TTR
TTL
TBR
TBL
STR
STL
SBR
SBL
SURFACE MOUNT
Terminal, Top,
Notch Right
Terminal, Top,
Notch Left
Terminal, Bottom,
Notch Right
Terminal, Bottom,
Notch Left
Socket, Top
Notch Right,
Socket, Top,
Notch Left
Socket, Bottom,
Notch Right
Socket, Bottom,
Notch Left
END
TEU
TED
SEU
SED
EDGE MOUNT
Terminal, Edge,
Notch Up
Terminal, Edge,
Notch Down
Socket, Edge,
Notch Up
Socket, Edge,
Notch Down
Wire Length ± (1,27) .050
OAL = Wire Length + (20,32) .800 ± (3,81) .150
For complete specications
see www.samtec.com?EQDP
or www.samtec.com?HQDP
Cable:
30 AWG twinax
micro ribbon
Signal Routing:
100
Ω Differential
Cable Bending Radius:
(11,11mm) 7/16" min
Plating:
Au over 50" (1,27m) Ni
Current Rating:
1 A max
Propagation Delay:
4.67 nsec/meter
Operating Temp Range:
-25°C to +105°C
Skew (pair-to-pair):
<10 ps/ft
Skew (within a pair):
<5 ps/ft
EMI Performance:
FCC Class A
RoHS Compliant:
Yes
WIRING
OPTION
END OPTIONS
TTR, TBL, STL,
SBR, TEU, SED to TTR,
TBL, STL, SBR, TED, SEU
or
TTL, TBR, STR,
SBL, TED, SEU to TTL,
TBR, STR, SBL, TEU, SED
WIRING REQUIREMENTS
TTR, TBL, STL,
SBR, TEU, SED to TTL,
TBR, STR, SBL, TEU, SED
or
TTL, TBR, STR,
SBL, TED, SEU to TTR,
TBL, STL, SBR, TED, SEU
1 or 2
3 or 4
NO. OF
PAIRS
END
NO. 1
WIRE
LENGTH
END
NO. 2
Specify
END
ASSEMBLIES
from chart
WIRING
OPTION
–1
= Pin 1 to
Pin 1
–2
= Pin 1 to
Pin 2
–3
= Pin 1 to
Second
Last Pin
–4
= Pin 1 to
Last Pin
SCREW
OPTION
Leave
blank for
no Screw
Option
–F
= End
No. 1
–S
= End
No. 2
–B
= Both
Ends
–“XX.XX”
= Wire Length
in Inches
(95,3mm) 03.75"
minimum
TYPE
HQDP
= (0,50mm)
.0197" pitch
EQDP
= (0,80mm)
.0315" pitch
–020, –040,
–060, –080
(20 pairs per bank)
HQDP Series
–014, –028,
–042, –056
(14 pairs per bank)
EQDP Series
END NO. 1
(–TEU SHOWN)
END NO. 2
(–TTR SHOWN)
Note: Cable lengths longer
than 40.00" (1 meter) are not
supported with S.I. test data.
Note: Verify part number with
Samtec’s Interactive Cable
Builder at www.samtec.com/
cable_builder/pitch.aspx
Note: This Series is
non-standard, non-returnable.
FILE NO. E111594
Cable
Length
6" (152,4mm)
12" (304,8mm)
19.68" (0,5m)
39.37" (1m)
EQDP
10.05 GHz / 20.10 Gbps
9.96 GHz / 19.92 Gbps
9.95 GHz / 19.90 Gbps
4.92 GHz / 9.84 Gbps
Rated @ 7dB Insertion Loss
HQDP
9.07 GHz / 18.14 Gbps
8.79 GHz / 17.58 Gbps
9.20 GHz / 18.40 Gbps
6.30 GHz / 12.60 Gbps
Performance data for other cable lengths and complete
test data available at www.samtec.com?HQDP or
www.samtec.com?EQDP or contact sig@samtec.com
Q PAIRS
TWINAX CABLE ASSEMBLIES
F-211
SAS
SATA
Fibre Channel
Ethernet
PCIe
Infiniband
Download test
report at
www.samtec.com?HQDP
or
www.samtec.com?EQDP
Protocols
Supported