參數資料
型號： EVAL-ADCMP551BRQZ
廠商： Analog Devices Inc
文件頁數： 4/16頁
文件大?。?/td> 0K
描述： BOARD EVALUATION ADCMP551BRQZ
標準包裝： 1
主要目的： 接口，比較器
已用 IC / 零件： ADCMP551
已供物品： 板
相關產品： ADCMP551BRQZ-ND - IC COMPARATOR PECL/LVPECL 16QSOP
ADCMP551/ADCMP552/ADCMP553
Data Sheet
Rev. A | Page 12 of 16
Figure 18. Propagation Delay Dispersion
COMPARATOR HYSTERESIS
The addition of hysteresis to a comparator is often useful in a
noisy environment or where it is not desirable for the
comparator to toggle between states when the input signal is at
the switching threshold. The transfer function for a comparator
with hysteresis is shown in Figure 19. If the input voltage
approaches the threshold from the negative direction, the
comparator switches from a 0 to a 1 when the input crosses
+VH/2. The new switching threshold becomes VH/2. The
comparator remains in a 1 state until the VH/2 threshold is
crossed coming from the positive direction. In this manner,
noise centered on 0 V input does not cause the comparator to
switch states unless it exceeds the region bounded by ±VH/2.
Positive feedback from the output to the input is often used to
produce hysteresis in a comparator (Figure 23). The major
problem with this approach is that the amount of hysteresis
varies with the output logic levels, resulting in a hysteresis that
is not symmetrical around zero.
In the ADCMP552, hysteresis is generated through the
programmable hysteresis pin. A resistor from the HYS pin to
VCCI creates a current into the part that is used to generate
hysteresis. Hysteresis generated in this manner is independent
of output swing and is symmetrical around the trip point. The
hysteresis versus resistance curve is shown in Figure 20.
A current source can also be used with the HYS pin. The
relationship between the current applied to the HYS pin and the
resulting hysteresis is shown in Figure 16.
Figure 19. Comparator Hysteresis Transfer Function
Figure 20. Comparator Hysteresis Transfer Function
MINIMUM INPUT SLEW RATE REQUIREMENT
As for all high speed comparators, a minimum slew rate must
be met to ensure that the device does not oscillate when the
input crosses the threshold. This oscillation is due in part to the
high input bandwidth of the comparator and the parasitics of
the package. Analog Devices recommends a slew rate of 1 V/s
or faster to ensure a clean output transition. If slew rates less
than 1 V/s are used, hysteresis should be added to reduce the
oscillation.
Q OUTPUT
INPUT VOLTAGE
1.5V OVERDRIVE
20mV OVERDRIVE
DISPERSION
VREF ± VOS
04722-017
OUTPUT
INPUT
0
1
0V
–VH
2
+VH
2
04722-018
120
100
80
60
40
20
0
100
10
1
04722-019
RHYS (k)
PROGRAMMED
HYSTERESIS
(mV)
相關PDF資料
PDF描述
EVAL-AD5232-10EBZ BOARD EVALUATION FOR AD5232-10
M3BBK-1018J IDC CABLE - MSR10K/MC10G/MSR10K
EVAL-ADG790EBZ BOARD EVALUATION ADG790
S1210R-331K INDUCTOR SHIELDED .33UH SMD
VI-B6X-EX CONVERTER MOD DC/DC 5.2V 75W
相關代理商/技術參數
參數描述
EVAL-ADCMP552BRQ 制造商:AD 制造商全稱:Analog Devices 功能描述:Single-Supply, High Speed PECL/LVPECL Comparators
EVAL-ADCMP552BRQZ 功能描述:BOARD EVALUATION ADCMP552BRQZ RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信，線路接口單元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板，電源，線纜，CD 其它名稱:82EBV2081
EVAL-ADCMP553BRM 制造商:Analog Devices 功能描述:EVALUATION BOARD-HIGH SPEED COMPARATOR - Bulk
EVAL-ADCMP553BRMZ 功能描述:BOARD EVALUATION ADCMP553BRMZ RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信，線路接口單元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板，電源，線纜，CD 其它名稱:82EBV2081
EVAL-ADCMP561BRQ 制造商:Analog Devices 功能描述:EVALUATION BOARD-HIGH SPEED COMPARATOR - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*