![](http://datasheet.mmic.net.cn/190000/FFT-F2-BA2-LCE10_datasheet_14908983/FFT-F2-BA2-LCE10_3.png)
WST.FB.CI1.10US2 Video inspection viewer
Maintenance tools
DCS.91.F23.LA Cleaning tool F2 contact
Used for maintenance cleaning. The tool is made with a sponge
alcohol reservoir (supplied empty).
16 dry cotton buds are included. The threaded end allows
extraction/reinstallation of the F2 contact alignment device.
WST.KI.125.34
Cleaning kit F2 contact
Fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being
soaked in IPA (Isopropyl Alcohol) used for cleaning the fibre optic
contacts.
DCT.F2.125.PA Fibre Optic ferrule cleaner
DCS.F2.035.PN Alignment device tool
Simple tool with two threaded end for installation/extraction
of the F2 contact alignment device. For use with WST.KI.125.34
kit above.
A portable fibre optic viewer for F2 contact consisting of handset
probe, LCD display, ferrule tips for LEMO contacts & software &
United States - AC power supply all in a rugged case. European
power supply version (WST.FB.CI1.10EU2). An optional USB
capture device is also available (WST.FB.CI1.00USB2)
Provides easy checking of fibre position within the fibre contact
during assembly
WST.LA.JDS.UF2
Visible laser source
This cleaning tool comes with a bush for different cleaning
configurations. More than 500 cleaning per cleaner. This cleaner
is for on-site purposes only and should not replace regular
maintenance cleaning with cotton buds and alcohol.
Note: 1) These positioners are suitable for use with both manual and pneumatic crimping tools according to the MIL-C-22520/7-01 standard.
2) These turrets can be used with manual crimping tool according to MIL-C-22520/1-01 standard. Power contacts are special with an oversized crimp barrel.
3) For specific use with the pre-terminated contacts FFT.F2.BA2.LCE10 or PST.F2.BA2.LCE10.
Part Number
Description
DCE.91.093.BVC
DCE.91.093.BVM
DCE.91.133.BVCW
DPC.91.701.V
DPC.91.101.A
Tooling for field termination (3K.93C Series)
Positioner for signal contacts
Positioner for power contacts
Positioner for signal 1) (male), 0.9 mm
Positioner for signal 1) (female), 0.9 mm
Positioner for power 2) (male and female), 1.3 mm
Manual crimping tool (signal contacts 0.9)
Manual crimping tool (power contacts 1.3)
Fibre cleaver
Manual crimping tool
Crimping tool for screen
Primary coat stripper
Part Number
Description
DPD.99.010.5K
DCP.91.023.TN
WST.OU.110.20PN
WST.PN.102.3CR
DPW.99.PZ6.HEX
Crimping tool for screen crimping on FUW and PUW
Spanner for tightening collet nut
Fibre cleaver for pre-terminated contact 3)
Primary coat stripper for pre-terminated contact 3)
Manual crimping tool for pre-terminated contact 3)
Accessories
11.9
4.4
Note: Alignment device should be ordered
as replacement item.
Part Number
PSS.F2.290.NZZ
PSS
Alignment device for F2 fibre optic contact