參數資料
型號: FTLF1217P2WTL
元件分類: 光收發
英文描述: FIBER OPTIC TRANSCEIVER, 1280-1380nm, 200Mbps(Tx), 200Mbps(Rx), BOARD/PANEL MOUNT, LC CONNECTOR
封裝: ROHS COMPLIANT-20
文件頁數: 11/13頁
文件大?。?/td> 778K
代理商: FTLF1217P2WTL
FTLF1217P2xTL Pluggable SFP Product Specification – September 2008
Finisar Corporation September 13, 2008 Rev. B
Page 7
VIII. Digital Diagnostic Functions
Finisar FTLF1217P2xTL SFP transceivers support the 2-wire serial communication
protocol as defined in the SFP MSA
1. It is very closely related to the E2PROM defined in
the GBIC standard, with the same electrical specifications.
The standard SFP serial ID provides access to identification information that describes
the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, Finisar SFP transceivers provide a unique enhanced digital diagnostic
monitoring interface, which allows real-time access to device operating parameters such
as transceiver temperature, bias current, transmitted optical power, received optical
power and transceiver supply voltage. It also defines a sophisticated system of alarm and
warning flags, which alerts end-users when particular operating parameters are outside of
a factory set normal range.
The SFP MSA defines a 256-byte memory map in E
2PROM that is accessible over a
2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic
monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally
defined serial ID memory map remains unchanged. The interface is identical to, and is
thus fully backward compatible with both the GBIC Specification and the SFP Multi
Source Agreement. The complete interface is described in Finisar Application Note AN-
2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through a 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the
SFP transceiver into those segments of the E
2PROM that are not write-protected. The
negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod
Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with
SCL to mark the start and end of serial protocol activation. The memories are organized
as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation
1,7 or Finisar Application
Note AN-2030.
Please note that evaluation board FDB-1018 is available with Finisar ModDEMO
software that allows simple to use communication over the 2-wire serial interface.
相關PDF資料
PDF描述
FTLF1217P2BTL FIBER OPTIC TRANSCEIVER, 1280-1380nm, 200Mbps(Tx), 200Mbps(Rx), BOARD/PANEL MOUNT, LC CONNECTOR
FTLF1318P2WTL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 1250Mbps(Tx), 1250Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF1319P1WTL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2125Mbps(Tx), 2125Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF1319P1BTL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2125Mbps(Tx), 2125Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF1321S1GTL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2667Mbps(Tx), 2667Mbps(Rx), THROUGH HOLE MOUNT, LC CONNECTOR
相關代理商/技術參數
參數描述
FTLF1217P2XTL 制造商:FRONTIER 制造商全稱:Frontier Electronics. 功能描述:Product Guide
FTLF1318P2BCL 功能描述:TXRX OPT SFP 1 GB/S 1310NM RoHS:是 類別:光電元件 >> 光纖 - 收發器 系列:- 標準包裝:20 系列:*
FTLF1318P2BTL 功能描述:TXRX OPT SFP 1.25GBPS 1310NM RoHS:是 類別:光電元件 >> 光纖 - 收發器 系列:- 標準包裝:20 系列:*
FTLF1318P2WTL 制造商:FINISAR 制造商全稱:FINISAR 功能描述:1.25 Gb/s RoHS Compliant Long-Wavelength Pluggable SFP Transceiver
FTLF1318P2XCL 制造商:FRONTIER 制造商全稱:Frontier Electronics. 功能描述:Product Guide