H2C
H2C
8
Precautions
How to Change the Time Range
Change the positions of the time range selector with a flat-blade
screwdriver or an Allen wrench.
Caution
Besuretoturn thepower offbefore changingthe timespecifi-
cation.Changingthetimerangewhilethetimeris inoperation
may cause a malfunction.
How to Select Power Frequency
Notice
Power frequency
Before using the timer, set the frequency selector located at
the rear panel to the proper power frequency (50 or 60 Hz).
Notethatifthefrequency selectoris setincorrectly,timemea-
surement may not be performed accurately against the set
time.
How to Mount the Timer on Mounting Track
Mounting
FirsthookportionAofthetimertothemountingtrack,thendepress
the timer in direction B.
Dismounting
Pull out portion C with a round-blade screwdriver and remove the
timer from the mounting track.
B
A
C
Electrical Set
The motor and clutch do not need to be reset simultaneously.
Use the voltage applied to the clutch for resetting with the H2C-R.
Do not allow power to be continuously applied to the motor and
clutch for extended periods of time.
Others
Donotturntheoperation timesetting knobbeyond therange ofthe
scale.Toachievehigheraccuracyinsetting,measuretheoperation
time while turning the operation time setting knob.
Thedeviationandsettingerrorfortheoperationtimeshowstheper-
centofFS.Theabsolutevalueofthedeviationandsettingerrorwill
not change even if the set time is changed. The time specifications
should therefore be selected to use the operation time as close to
FS as possible.
At high temperatures, the operation voltage will be 90% or less if
voltage is applied continuously after timeout. Be sure to keep the
voltage within the allowable voltage fluctuation range.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. L007-E1-8
!
!