2
FN3990.9
April 25, 2013
Absolute Maximum Ratings
Thermal Information
Voltage Between V+ and V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSUPPLY
Digital Input Current (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . .
±25mA
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . . 1800V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Thermal Resistance (Typical, Note 1)
θ
JA (°C/W)
PDIP Package* . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
170
SOT-23 Package . . . . . . . . . . . . . . . . . . . . . . . . . . .
210
Maximum Junction Temperature (Die) . . . . . . . . . . . . . . . . . . . 175°C
Maximum Junction Temperature (Plastic Package) . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300°C
(SOIC and SOT-23 - Lead Tips Only)
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
4.
θJA is measured with the component mounted on an evaluation PC board in free air.
5. If an input signal is applied before the supplies are powered up, the input current must be limited to this maximum value.
Electrical Specifications VSUPPLY = ±5V, RL = 10kΩ, VEN = 2.0V, Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
TEMP. (°C)
MIN
TYP
MAX
UNITS
DC SUPPLY CHARACTERISTICS
Supply Voltage
Full
±4.5
±5.0
±5.5
V
Supply Current (VOUT =0V)
VEN = 2V
25, 70
-
10.5
13
mA
VEN = 2V
0
-
14.5
mA
VEN = 0.8V
25, 70
-
100
115
μA
VEN = 0.8V
0
-
100
125
μA
ANALOG DC CHARACTERISTICS
Output Voltage Swing without Clipping
VOUT =VIN ± VIO ± 20mV
25, 70
±2.7
±2.8
-
V
0
±2.4
±2.5
-
V
Output Current
Full
15
20
-
mA
Input Bias Current
Full
-
30
50
μA
Output Offset Voltage
25
-10
-
10
mV
Output Offset Voltage Drift (Note 3)
Full
-
25
50
μV/°C
SWITCHING CHARACTERISTICS
Turn-On Time
25
-
160
-
ns
Turn-Off Time
25
-
320
-
ns
DIGITAL DC CHARACTERISTICS
Input Logic High Voltage
Full
2
-
V
Input Logic Low Voltage
Full
-
0.8
V
EN Input Current
0V to 4V
Full
-2
-
2
μA
AC CHARACTERISTICS
Insertion Loss
1VP-P
Full
-
0.04
0.05
dB
HA4600