參數資料
型號： HD66727A03TA0L
廠商： Hitachi,Ltd.
英文描述： Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver with Key Scan Function
中文描述： 低功耗點陣液晶顯示控制器/鍵掃描功能驅動程序
文件頁數： 33/97頁
文件大?。?/td> 513K
代理商： HD66727A03TA0L
HD66727
33
Power Control
The power control instruction (Figure 13) includes the AMP, SLP, and STB bits.
AMP:
When AMP = 1, each voltage follower for V1 to V5 pins and the booster are turned on. When AMP
= 0, current consumption can be reduced while character or segment display controlled by the multiplexing
drive method is not being used.
SLP:
When SLP = 1, the HD66727 enters the sleep mode, where all the internal operations are halted
except for the annunciator display function, key scan function, and the R-C oscillator, thus reducing current
consumption. For details, refer to the Sleep Mode section. Only the following instructions can be executed
during the sleep mode.
1. Annunciator address (AAN) set
2. Annunciator data write
3. LED drive/general output port data write
4. Annunciator display on or off (DA = 1 or 0)
5. Voltage follower on or off (AMP = 1 or 0)
6. Standby mode set (STB = 1)
7. Sleep mode cancel (SLP = 0)
8. Key scan data (SD) read
9. Key scan interrupt generation enable/disable (IRE = 1 or 0)
10.Key scan cycle (KF) set
During the sleep mode, the other RAM data and instructions cannot be updated but they are retained.
STB:
When STB = 1, the HD66727 enters the standby mode, where the device completely stops, halting all
the internal operations including the internal R-C oscillator and no external clock pulses are supplied.
However, annunciator display alone is available when the alternating signal for annunciator-driving signals
is supplied to the EXM pin. When the annunciator display is not needed, make sure to turn off display (DA
= 0). Normal key scanning is also halted in the standby mode. However, the HD66727 can detect four key
inputs connected with strobe signal KST0, thus generating the key scan interrupt (IRQ*). For details, refer
to the Standby Mode section and the Key Scan Interrupt section. Only the following instructions can be
executed during the standby mode.
1. Annunciator address (AAN) set
2. Annunciator data write
3. LED drive/general output port data write
4. Annunciator display on or off (DA = 1 or 0)
5. Voltage follower on or off (AMP = 1 or 0)
6. Start oscillator
7. Standby mode cancel (STB = 0)
8. Key scan interrupt generation enable/disable (IRE = 1 or 0)
相關PDF資料
PDF描述
HD66705U Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver(圖形LCD控制器/驅動器)
HD66710 (Dot Matrix Liquid Crystal Display Controller/Driver)
HD66710A00FS 16 AMP SPDT MINIATURE POWER RELAY
HD66710A00TF (Dot Matrix Liquid Crystal Display Controller/Driver)
HD66712U Dot-Matrix Liquid Crystal Display Controller/Driver(點陣液晶顯示控制器/驅動器)
相關代理商/技術參數
參數描述
HD66727A04 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Display Driver
HD66727A04BP 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Display Driver
HD66727A04TA0 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Display Driver
HD66727A04TA0L 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver with Key Scan Function
HD66728 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:128 x 128-dot Graphics LCD Controller/Driver with Four-grayscale Functions
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*