- 您現在的位置：買賣IC網 > PDF目錄370575 > HFBR-5107T 820 nm，100VG-AnyLAN Multimode Fiber Transceivers in Low Cost 1x9 Package Style(820 nm，100VG-AnyLAN 多模式光收發器（低價格 1x9封裝類型）) PDF資料下載
參數資料
| 型號： | HFBR-5107T |
| 英文描述： | 820 nm，100VG-AnyLAN Multimode Fiber Transceivers in Low Cost 1x9 Package Style(820 nm，100VG-AnyLAN 多模式光收發器（低價格 1x9封裝類型）) |
| 中文描述： | 820納米，100VG - AnyLAN多模光纖收發器的低成本1x9封裝形式（820納米，100VG - AnyLAN多模式光收發器（低價格1x9封裝類型）） |
| 文件頁數： | 6/16頁 |
| 文件大?。?/td> | 214K |
| 代理商： | HFBR-5107T |
6
NO INTERNAL CONNECTION
NO INTERNAL CONNECTION
HFBR-510X
TOP VIEW
V
EE
1
RD
2
RD
3
SD
4
V
CC
5
V
CC
6
TD
7
TD
8
V
EE
9
C1
C2
L1
L2
R2
R3
R1
R4
C5
C3
C4
R9
R10
V
CC
FILTER
CC
PINS
AT V
R5
R7
R6
R8
C6
RD
RD
SD
V
CC
TD
TD
TERMINATION
AT PHY
DEVICE
INPUTS
NOTES:
THE SPLIT-LOAD TERMINATIONS FOR ECL SIGNALS NEED TO BE LOCATED AT THE INPUT
OF DEVICES RECEIVING THOSE ECL SIGNALS. RECOMMEND 4-LAYER PRINTED CIRCUIT
BOARD WITH 50 OHM MICROSTRIP SIGNAL PATHS BE USED.
R2 = R3 = R5 = R7 = R9 = 82 OHMS.
C1 = C2 = C3 = C5 = C6 = 0.1 μF.
C4 = 10 μF.
L1 = L2 = 1 μH COIL OR FERRITE INDUCTOR.
TERMINATION
AT TRANSCEIVER
INPUTS
Rx
Rx
Tx
Tx
V
CC
V
CC
Figure 7. Recommended Decoupling and Termination Circuits.
The Agilent 1300 nm transmitters
are allowed to generate the worst
case Active Output jitter shown in
Table 27 of section 18.9 when
driven by circuits optimized for
these link applications. The
Active Output Specifications of
the 100VG-AnyLAN standard are
met by the HFBR-5106.
The Agilent 1300 nm receivers
tolerate the worst case input
optical response time and
systematic jitter shown in
Table 27 of Section 18.9. The
Active Input Specification of the
IEEE 802.12 100VG-AnyLAN
standard are met by the
HBFR-5106.
The jitter specifications stated in
the 1300 nm transceiver
specification tables are derived
from the values in Table 27 of
section 18.9 of the IEEE 802.12
specification. They represent the
worst case jitter contributions
from the transceiver meeting the
overall system jitter in Annex E.
In practice the typical jitter
contribution of the Agilent
transceivers is well below these
maximum allowed values.
Recommended Handling
Precautions
It is advised that normal static
precautions be taken in the
handling and assembly of these
transceivers to prevent damage
which may be induced by
electrostatic discharge (ESD).
The HFBR-510X series of
transceivers are certified as
Mil-Std-883C Method 3015.4
Class 1 products.
Care should be used to avoid
shorting the receiver data or
signal detect outputs directly to
ground without proper current
limiting impedance.
Solder and Wash Process
Compatibility
The transceivers are delivered
with a protective process plug
inserted into the duplex SC
connector receptacle. This
process plug protects the optical
subassemblies during wave solder
and aqueous wash processing and
acts as a dust cover during
shipping. These transceivers are
compatible with either industry
standard wave or hand soldering
processes.
Shipping Container
The transceiver is packaged in a
shipping container designed to
protect it from mechanical and
ESD damage during shipment or
storage.
Board Layout –
Decoupling Circuit and
Ground Planes
It is important to take care in the
layout of your circuit board to
achieve optimum performance
from these transceivers. Figure 7
provides a good example of a
schematic for a power supply
decoupling circuit that works
相關PDF資料 |
PDF描述 |
|---|---|
| HFBR-5107 | 820 nm，100VG-AnyLAN Multimode Fiber Transceivers in Low Cost 1x9 Package Style(820 nm，100VG-AnyLAN 多模式光收發器（低價格 1x9封裝類型）) |
| HFBR5106T | 1300 nm，100VG-AnyLAN Multimode Fiber Transceivers in Low Cost 1x9 Package Style(1300 nm，100VG-AnyLAN 多模式光收發器（低價格 1x9封裝類型）) |
| HFBR-5111 | Low Cost, Industry Standard FDDI MIC Transceivers(2x11)(低價格，工業標準 FDDI MIC收發器(2x11)) |
| HFBR-5112 | Low Cost, Industry Standard FDDI MIC Transceivers(Narrow 1x13)(低價格，工業標準 FDDI MIC收發器(狹長 1x13)) |
| HFBR-5113 | Low Cost, Industry Standard FDDI MIC Transceivers(Standard 1x13)(低價格，工業標準 FDDI MIC收發器(標準1x13)) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFBR-5111 | 制造商:Avago Technologies 功能描述:TRANSCEIVER FDDI MIC |
| HFBR-5112 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Low Cost, Industry Standard FDDI MIC Transceivers |
| HFBR-5113 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:125 MBd ATM and Fast Ethernet Transceiver in Low Cost Standard 1x13 Package |
| HFBR-5198 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Low Cost, Industry Standard FDDI MIC Transceivers |
| HFBR-5203 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style |
發布緊急采購，3分鐘左右您將得到回復。