- 您現在的位置：買賣IC網 > PDF目錄223966 > HJ2-L-AC200V POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT PDF資料下載
參數資料
| 型號： | HJ2-L-AC200V |
| 元件分類： | 功率/信號繼電器 |
| 英文描述： | POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT |
| 封裝： | ROHS COMPLIANT |
| 文件頁數： | 3/11頁 |
| 文件大?。?/td> | 313K |
| 代理商： | HJ2-L-AC200V |
HJ
NOTES
1. Coil voltage
Please refer to “RATING” about coil input
power supply.
2. LED display
Operation is displayed by the light
emitted from the LED. The LED may
remain briey lit if voltage remains after
the relay opens.
3. Switching lifetime
The switching lifetime is dened under
the standard test condition specied in
the JIS* C 5442 standard (temperature
15 to 35
°C 59 to 95°F, humidity 25 to
75%). Check this with the real device as it
is affected by coil driving circuit, load
type, activation frequency, activation
phase,ambient conditions and other
factors.
Also, be especially careful of loads such
as those listed below.
1) When used for AC load-operating and
the operating phase is synchronous.
Rocking and fusing can easily occur due
to contact shifting.
2) High-frequency load-operating
When high-frequency opening and
closing of the relay is performed with a
load that causes arcs at the contacts,
nitrogen and oxygen in the air is fused by
the arc energy and HNO3 is formed. This
can corrode metal materials.
Three countermeasures for these are
listed here.
(1) Incorporate an arc-extinguishing
circuit.
(2) Lower the operating frequency
(3) Lower the ambient humidity
4. Usage, transport and storage
conditions
1) Temperature, humidity and pressure
during usage, storage and transport
(1) Temperature:
–40 to +70
°C –40 to +158°F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
Temperature and humidity range for
usage, transport, and storage
(3) Atmospheric pressure: 86 to 106 kPa
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0
°C 32°F.This
causes problems such as sticking of
movable parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
5. Operation method for test button
1) Push and release 1 gently to conrm
relay switching.
2) To lock to one side turn 90
° counter-
clockwise while pushing lock and turn 90
°
clockwise to release.
3) Do not use the test button for anything
other than testing, such as when
checking the circuit.
6. Diode characteristics
1) Reverse breakdown voltage: 1,000 V
2) Forward current:
1 A
7. Diode and CR built-in type
Since the diode and CR inside the relay
coil are designed to absorb the counter
emf, the element may be damaged if a
large surge, etc., is applied to the diode
and CR. If there is the possibility of a
large surge voltage from the outside,
please implement measures to absorb it.
;;
;;;;
;;;;;;
;;;;;;;;
;;;;;;;;;;
;;;;;;;;;
;;;;;;;;
;;;;;;
;;;;
;;
Humidity, %RH
Temperature,
°C °F
Tolerance range
85
5
070
–40
+32
+158
–40
(Avoid freezing
when used at
temperatures lower
than 0
°C)
32
°F
(Avoid
condensation
when used at
temperatures higher
than 0
°C 32°F)
1
Release
Push
For Lock
For Release
All Rights Reserved C
OPYRIGHT Panasonic Electric Works Co., Ltd.
相關PDF資料 |
PDF描述 |
|---|---|
| HJ2-L-AC200V-R | POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT |
| HJ2-L-AC200V-R-6 | POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT |
| HJ2-L-AC200V-6 | POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT |
| HJ2-L-AC12V | POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT |
| HJ2-L-AC12V-6 | POWER/SIGNAL RELAY, DPDT, MOMENTARY, 1500mW (COIL), 7A (CONTACT), 125VDC (CONTACT), SOCKET MOUNT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HJ2-L-AC240V | 功能描述:通用繼電器 2 Form C 240VAC with Indicator RoHS:否 制造商:Omron Electronics 觸點形式:1 Form A (SPST-NO) 觸點電流額定值:150 A 線圈電壓:24 VDC 線圈電阻:144 Ohms 線圈電流:167 mA 切換電壓:400 V 安裝風格:Chassis 觸點材料: |
| HJ2-L-AC24V | 功能描述:通用繼電器 2 Form C 24VAC with LED Indicator RoHS:否 制造商:Omron Electronics 觸點形式:1 Form A (SPST-NO) 觸點電流額定值:150 A 線圈電壓:24 VDC 線圈電阻:144 Ohms 線圈電流:167 mA 切換電壓:400 V 安裝風格:Chassis 觸點材料: |
| HJ2-L-AC48V | 功能描述:通用繼電器 2 Form C 48VAC with LED Indicator RoHS:否 制造商:Omron Electronics 觸點形式:1 Form A (SPST-NO) 觸點電流額定值:150 A 線圈電壓:24 VDC 線圈電阻:144 Ohms 線圈電流:167 mA 切換電壓:400 V 安裝風格:Chassis 觸點材料: |
| HJ2-L-DC110V | 功能描述:通用繼電器 2 Form C 100/110VDC with LED Indicator RoHS:否 制造商:Omron Electronics 觸點形式:1 Form A (SPST-NO) 觸點電流額定值:150 A 線圈電壓:24 VDC 線圈電阻:144 Ohms 線圈電流:167 mA 切換電壓:400 V 安裝風格:Chassis 觸點材料: |
| HJ2-L-DC12V | 功能描述:通用繼電器 2 Form C 12VDC with LED Indicator RoHS:否 制造商:Omron Electronics 觸點形式:1 Form A (SPST-NO) 觸點電流額定值:150 A 線圈電壓:24 VDC 線圈電阻:144 Ohms 線圈電流:167 mA 切換電壓:400 V 安裝風格:Chassis 觸點材料: |
發布緊急采購，3分鐘左右您將得到回復。