- 您現在的位置：買賣IC網 > PDF目錄43682 > HR10-10P-12P(73) 12 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, PLUG PDF資料下載
參數資料
| 型號： | HR10-10P-12P(73) |
| 元件分類： | 圓形連接器 |
| 英文描述： | 12 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, PLUG |
| 文件頁數： | 3/20頁 |
| 文件大小： | 2215K |
| 代理商： | HR10-10P-12P(73) |
189
HR10 Series●Push-Pull Connectors
■
Cable connecting methods
HR10B-2.5CP
HR10B-2.5CJ
1.Cable end treatment
Fig.1
1.Dimensions for cable end treatment are shown in
Fig 1.
2.Termination is described below.
(1).Strip cable outer jacket as indicated.
(2).Slit outer jacket on both sides per Fig.1.
(3).Fold back outer cover.
(4).Remove insulator from cable.
2.Soldering male pin to cable center
conductor.
Fig.2
1.Solder male pin to cable center conductor as
indicated in Fig.2.
(1).Pre-solder the solder pot of pin with 0.5mm
string solder.
(2).Male pin should fit flush against the cable
insulator as shown.
(3).Remove any excess solder from the pin with a
knife.This surface must be smooth.
(4).A properly soldered terminal will yield 500gf
when stretched.
3.Crimping cable outer conductor
Fig.3
1.Insert cable prepared per PROCESS 2 into the
connector.The cable should be inserted until it
comes to a full stop.This may be verified by
checking the dimension from the side of the
connector to the top of the contact(as indicated in
Fig 3). This dimension should be A.
2.Crimp this installed metal clamp with tool HR10-
TC-01 per Fig.3 and remove excess insulation with
a knife.
It is possible to pull back the contact.
Hold cable when crimping metal clamp and keep
the dimension to show in Fig 3. after crimping metal
clamp.
11±0.5
1.4±0.2
3.7±0.2
(2.5)
Slit cable outer jaket
2 pieces (180° reverse side)
Malu pin or Female pin
Soldering
Should fix flush
Contact fixing jig
such as vise
Clamp metal
(HR10B-2.5CP)
A
Connector
Remove excess insulator
material (remaining after
clamping is complated)
with a knife or aimilarobject.
Table 1 dimenshion A
2.5CP
2.5CJ
1.5±0.2mm
0
mm
+0.3
0
相關PDF資料 |
PDF描述 |
|---|---|
| HR10-10P-12S(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, PLUG |
| HR10-10R-12P(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, SOLDER, RECEPTACLE |
| HR10-10R-12PA(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, SOLDER, RECEPTACLE |
| HR10-10R-12S(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, SOLDER, RECEPTACLE |
| HR10-10R-12SA(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, SOLDER, RECEPTACLE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HR10-10P-12S | 功能描述:PLUG W/SOCKET INSERT (12 CON) RoHS:否 類別:連接器，互連式 >> 圓形 系列:HR10 標準包裝:1 系列:軍用, MIL-DTL-5015, MS 連接器類型:插座，公形引腳 位置數:2 外殼尺寸 - 插件:22-11 外殼尺寸，MIL:- 安裝類型:自由懸掛 端子:焊杯 緊固型:有螺紋 方向:N（正常型） 防護等級:抗環境影響 外殼材料，表面處理:鋁，鍍草綠色鎘 觸點表面涂層:銀 特點:應力消除 包裝:散裝 觸點涂層厚度:- 額定電流:- 電壓 - 額定:1750VAC，2450VDC 工作溫度:-55°C ~ 125°C 配套產品:IMS3108R22-11S-ND - CONN PLUG 2 POS RT ANG W/SCKTIMS3106F22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106E22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106R22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS2518322-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKT 其它名稱:IMS3101E22-11P |
| HR10-10P-12S(73) | 功能描述:環形推拉式連接器 12P PLUG SHELL SZ 10 FEMALE AU TERM SOLDR RoHS:否 制造商:Hirose Connector 產品類型:Connectors 系列:HR10 觸點類型:Socket (Female) 外殼類型:Receptacle 觸點數量:4 外殼大小:7 安裝風格:Panel 端接類型:Solder 電流額定值:2 A |
| HR10-10P-T02 | 功能描述:環形推拉式連接器 WIRING TOOL FOR HR10-10P CONNECTOR RoHS:否 制造商:Hirose Connector 產品類型:Connectors 系列:HR10 觸點類型:Socket (Female) 外殼類型:Receptacle 觸點數量:4 外殼大小:7 安裝風格:Panel 端接類型:Solder 電流額定值:2 A |
| HR10-10R-12P | 功能描述:RECEPTACLE W/PIN INSERT (12CON) RoHS:否 類別:連接器，互連式 >> 圓形 系列:HR10 標準包裝:1 系列:軍用, MIL-DTL-5015, MS 連接器類型:插座，公形引腳 位置數:2 外殼尺寸 - 插件:22-11 外殼尺寸，MIL:- 安裝類型:自由懸掛 端子:焊杯 緊固型:有螺紋 方向:N（正常型） 防護等級:抗環境影響 外殼材料，表面處理:鋁，鍍草綠色鎘 觸點表面涂層:銀 特點:應力消除 包裝:散裝 觸點涂層厚度:- 額定電流:- 電壓 - 額定:1750VAC，2450VDC 工作溫度:-55°C ~ 125°C 配套產品:IMS3108R22-11S-ND - CONN PLUG 2 POS RT ANG W/SCKTIMS3106F22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106E22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106R22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS2518322-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKT 其它名稱:IMS3101E22-11P |
| HR10-10R-12P(73) | 功能描述:環形推拉式連接器 12P RECP SHELL SZ 10 MALE AU TERM SOLDR RoHS:否 制造商:Hirose Connector 產品類型:Connectors 系列:HR10 觸點類型:Socket (Female) 外殼類型:Receptacle 觸點數量:4 外殼大小:7 安裝風格:Panel 端接類型:Solder 電流額定值:2 A |
發布緊急采購，3分鐘左右您將得到回復。