- 您現在的位置：買賣IC網 > PDF目錄60903 > HRM030CN05W3 (EMC TECHNOLOGY INC) 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR PDF資料下載
參數資料
| 型號： | HRM030CN05W3 |
| 廠商： | EMC TECHNOLOGY INC |
| 元件分類： | 衰減器 |
| 英文描述： | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| 文件頁數： | 2/3頁 |
| 文件大?。?/td> | 168K |
| 代理商： | HRM030CN05W3 |
EMC TECHNOLOGY
CAGE CODE # 24602
DWG #
1009835000
8851 SW OLD KANSAS AVE.
CHANGE NOTICE
EN 04-E033
REV LVL
-
STUART, FL 34997
SHEET
2
OF
3
CALCULATE TCA USING THE FOLLOWING FORMULA:
TCA =
SLOPE
.
ATTENUATION @ 25°C
3.3.1.6.3 ACCEPTANCE LIMITS: NOMINAL TCA +/-0.001 dB/dB/°C.
3.2.2
GROUP B TESTING (7 SAMPLES APPROVED FROM GROUP A).
3.2.2.1
SUB-GROUP 1 (3 SAMPLES)
3.2.2.1.1 LOW TEMPERATURE OPERATION
3.2.2.1.1.1
USE FINAL ELECTRICAL MEASUREMENTS FROM GROUP A.
3.2.2.1.1.2
DISSIPATE LOW POWER FOR A DURATION OF 45 +5/-0 MINUTES.
ALLOW TO STABILIZE AT 25°C FOR 24 HOURS.
3.2.2.1.2 AFTER LOW TEMPERATURE ELECTRICAL MEASUREMENTS - MEASURE AND
RECORD VSWR @ 1 GHZ AND ATTENUATION AT DC (0 GHZ) AND 1.0 GHZ.
3.2.2.1.3 HIGH TEMPERATURE BAKE – +125°C +/- 5°C FOR 100 HRS THEN STABILIZE AT 25°C
FOR 4 HRS.
3.2.2.1.3.1
VISUAL EXAMINATION - INSPECT FOR EVIDENCE OF MECHANCIAL
DAMAGE.
3.2.2.1.4 AFTER HIGH TEMPERATURE BAKE ELECTRICAL TEST - MEASURE AND RECORD
VSWR @ 1 GHZ AND ATTENUATION AT DC (0 GHZ) AND 1.0 GHZ.
3.2.2.1.5 TERMINATION ADHESION - SOLDER A WIRE AND PULL WITH 15 GRAMS
PERPENDICULAR TO AND AWAY FROM THE SURFACE AREA.
3.2.2.1.5.1
VISUAL INSPECTION – THERE SHALL BE NO SEPARATION OF
MATERIAL.
3.2.2.1.6 TERMINATION SOLDERABILITY IMMERSE EACH SAMPLE 5 SECONDS IN A SOLDER
POT HELD AT 220°C +/- 5°C USING 60/40 OR 63/37 TIN-LEAD COMPOSITION.
3.2.2.2
SUB-GROUP 2 (4 SAMPLES)
3.2.2.2.1 INITIAL RF MEASUREMENTS - USE FINAL ELECTRICAL MEASUREMENTS FROM
GROUP A.
3.2.2.2.2 LIFE TEST – OPERATE SAMPLES UNITS FOR 1000 HRS AT 70°C AT INPUT POWER
PER 1.1.6. ELECTRICAL MEASUREMENTS SHALL BE MADE AT 250 +48/-0 HRS, 500
+48/-0 HRS, AND 1000 +48/-0 HRS.
3.2.2.2.3 FINAL RF MEASUREMENTS - MEASURE AND RECORD VSWR @ 1 GHZ AND
ATTENUATION AT DC (0 GHZ) AND 1.0 GHZ.
3.2.3
GROUP C (QCI TESTING 4 SAMPLES APPROVED FROM GROUP A).
3.2.3.1
LOAD LIFE TEST – BURN-IN UNITS AT 70°C WITH INPUT POWER (SEE 1.1.6) FOR A DURATION
OF 1000 HOURS (1 HOURS ON, HOUR OFF). MEASURE AND RECORD ELECTRICALS AT 0,
250, 500, AND 1000 HOURS.
3.2.3.2
AFTER LOAD LIFE RF MEASUREMENTS – MEASURE AND RECORD VSWR AND ATTENUATION
AT 1 GHZ AT 25°C. TEST ACCEPTABLE LIMITS PER 4.2.1 OF TP-8965.
3.4
TEST DATA REQUIREMENTS:
3.4.1
TEST DATA REQUIRED FOR CUSTOMER - SEE PARAGRAPH 5.0 OF TP-8965.
3.4.2
DATA RETENTION - 24 MONTHS.
3.4.3
TEST SAMPLES REQUIRED FOR CUSTOMER - SEE PARAGRAPH 5.0 OF TP-8965.
4.0
PACKAGING:
STANDARD PACK PER MC0023. (SERIALIZED WAFFLE PACK)
相關PDF資料 |
PDF描述 |
|---|---|
| HRM030CN06W3 | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HRM030CN07W3 | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HRM050AN03W3 | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HRM050AN04W3 | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HRM050AN07W3 | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HRM-100-141WBPJBN-1/SO | 制造商:Hirose 功能描述:902-3244-8-00 EACH |
| HRM-100-141WBPJBN-1/SO-MD | 制造商:Hirose 功能描述:HRM-100-141WBPJBN-1/SO-MD |
| HRM-100-1S(40) | 制造商:Hirose Electric 功能描述:Bulk 制造商:Hirose 功能描述:Conn SMA PL 0Hz to 12.4GHz 50Ohm Solder ST Cable Mount Gold |
| HRM-101 | 制造商:HRS 制造商全稱:HRS 功能描述:RFCO-AXIAL CONNECTORS |
| HRM-101(09) | 制造商:Hirose Electric 功能描述:Bulk |
發布緊急采購，3分鐘左右您將得到回復。