- 您現在的位置：買賣IC網 > PDF目錄370688 > HSDL-1001 Infrared Compliant Transceiver(紅外順應收發器) PDF資料下載
參數資料
| 型號： | HSDL-1001 |
| 英文描述： | Infrared Compliant Transceiver(紅外順應收發器) |
| 中文描述： | 紅外兼容收發器（紅外順應收發器） |
| 文件頁數： | 8/8頁 |
| 文件大小： | 152K |
| 代理商： | HSDL-1001 |
Appendix A. Test
Methods
A.1. Background Light and
Electromagnetic Field
There are four ambient
interference conditions in which
the receiver is to operate correctly.
The conditions are to be applied
separately:
1. Electromagnetic field: 3 V/m
maximum (refer to IEC 801-3.
severity level 3 for details)
2. Sunlight: 10 kilolux maximum
at the optical port
This is simulated with an IR
source having a peak wavelength
within the range 850 nm to
900 nm and a spectral width less
than 50 nm biased to provide
490
μ
W/cm
2
(with no modula-
tion) at the optical port. The light
source faces the optical port.
This simulates sunlight within the
IrDA spectral range. The effect
of longer wavelength radiation is
covered by the incandescent
condition.
3. Incandescent Lighting:
1000 lux maximum
This is produced with general
service, tungsten-filament, gas-
filled, inside-frosted lamps in the
60 Watt to 150 Watt range to
generate 1000 lux over the
horizontal surface on which the
equipment under test rests. The
light sources are above the test
area. The source is expected to
have a filament temperature in
the 2700 to 3050 degrees Kelvin
range and a spectral peak in the
850 nm to 1050 nm range.
4. Fluorescent Lighting: 1000 lux
maximum
This is simulated with an IR
source having a peak wavelength
within the range 850 nm to
900 nm and a spectral width of
less than 50 nm biased and
modulated to provide an optical
square wave signal (0
μ
W/cm
2
minimum and 0.3
μ
W/cm
2
peak
amplitude with 10% to 90% rise
and fall times less than or equal
to 100 ns) over the horizontal
surface on which the equipment
under test rests. The light sources
are above the test area. The
frequency of the optical signal is
swept over the frequency range
from 20 kHz to 200 kHz.
Due to the variety of fluorescent
lamps and the range of IR
emissions, this condition is not
expected to cover all circum-
stances. It will provide a common
floor for IrDA operation.
www.semiconductor.agilent.com
Data subject to change.
Copyright 1999 Agilent Technologies Inc.
5965-5363E (11/99)
相關PDF資料 |
PDF描述 |
|---|---|
| HSDL-2300 | Infrared Compliant 4 Mb/s 3.3 V Transceiver(4 Mb/s 3.3 V 紅外順應收發器) |
| HSDL-3201 | Low Power Compliant 115.2 kb/s Infrared Transceiver(115.2 kb/s紅外順應收發器) |
| HSDL-4230 | High-Performance T-1 3 /4 (5 mm) TS AlGaAs Infrared (875 nm) Lamp(高性能T-1 3 /4 (5 mm)透明物質鋁砷化鎵紅外線(875 nm)照明燈) |
| HSDL-4400 | High-Performance IR Emitter Photodiode in Subminiature SMT Package(高性能 IR發射器光二極管（微型SMT封裝）) |
| HSDL-5400 | High-Performance IR PIN Photodiode in Subminiature SMT Package(高性能 IR發射器光二極管（微型SMT封裝）) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HSDL-1001#001 | 制造商:Hewlett Packard Co 功能描述: |
| HSDL-1001#002 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:IrDA 1.0 Compliant 115.2Kbs 3-5V Transceiver. Mid Option.Tape & Reel(not recommended for new design) |
| HSDL-1001#004 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:IrDA 1.0 Compliant 115.2Kbs 3-5V Transceiver.Front Opt.Tape & Reel(not recommended for new design) |
| HSDL-1001#011 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:IrDA 1.0 Compliant 115.2Kb/s 3-5V T.ceiver. Top Optn. Sample Strip(10units/strip)-not for new design |
| HSDL-1001#012 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:IrDA 1.0 Compliant 115.2Kb/s 3-5V T/ceiver. Mid Optn.Sample Strip (10units/strip) not for new design |
發布緊急采購，3分鐘左右您將得到回復。