參數資料
型號: ICX085AL
廠商: Sony Corporation
英文描述: Diagonal 11mm (Type 2/3) Progressive Scan CCD Image Sensor With Square Pixel For B/W Cameras(對角線式、11毫米(2/3型)步進掃描CCD圖像傳感器(具有正方形像素,用于黑白照相機))
中文描述: 對角線11毫米(類型2 / 3)漸進式掃描CCD在廣場為/黑白攝像機(對角線式,11毫米(2 / 3型)步進掃描防治荒漠化圖像傳感器(具有正方形像素,用于黑白照相機像素圖像傳感器))
文件頁數: 19/20頁
文件大小: 211K
代理商: ICX085AL
– 19 –
ICX085AL
Notes on Handling
1) Static charge prevention
CCD image sensors are easily damaged by static discharge. Before handling be sure to take the following
protective measures.
a) Either handle bare handed or use non-chargeable gloves, clothes or material. Also use conductive shoes.
b) When handling directly use an earth band.
c) Install a conductive mat on the floor or working table to prevent the generation of static electricity.
d) Ionized air is recommended for discharge when handling CCD image sensor.
e) For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
2) Soldering
a) Make sure the package temperature does not exceed 80°C.
b) Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a ground 30W
soldering iron and solder each pin in less than 2 seconds. For repairs and remount, cool sufficiently.
c) To dismount an image sensor, do not use a solder suction equipment. When using an electric
desoldering tool, use a thermal controller of the zero cross On/Off type and connect it to ground.
3) Dust and dirt protection
Image sensors are packed and delivered by taking care of protecting its glass plates from harmful dust and
dirt. Clean glass plates with the following operation as required, and use them.
a) Operate in clean environments (around class 1000 is appropriate).
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized
air is recommended.)
c) Clean with a cotton bud and ethyl alcohol if the grease stained. Be careful not to scratch the glass.
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
moving to a room with great temperature differences.
e) When a protective tape is applied before shipping, just before use remove the tape applied for
electrostatic protection. Do not reuse the tape.
4) Do not expose to strong light (sun rays) for long periods. For continuous using under cruel condition
exceeding the normal using condition, consult our company.
5) Exposure to high temperature or humidity will affect the characteristics. Accordingly avoid storage or usage
in such conditions.
6) CCD image sensors are precise optical equipment that should not be subject to too much mechanical
shocks.
相關PDF資料
PDF描述
ICX086AKB Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
ICX086AK 1/4-Inch CCD Image Sensor For NTSC Color Video Cameras(1/4 英寸CCD圖像傳感器(用于NTSC制式彩色攝像機))
ICX086AL 1/4-Inch CCD Image Sensor For EIA B/W Video Cameras(1/4 英寸CCD圖像傳感器(用于EIA黑白攝像機))
ICX087AKB Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras
ICX087AK Diagonal 4.5mm (Type 1/4) CCD Image Sensor For PAL Color Video Cameras(對角線式、4.5毫米(1/4型)CCD圖像傳感器(用于PAL制式彩色攝像機))
相關代理商/技術參數
參數描述
ICX086AK 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
ICX086AKB 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
ICX086AL 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for EIA B/W Video Cameras
ICX087AK 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras
ICX087AKB 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras