參數資料
型號: ID1014
英文描述: White Bronze
中文描述: 白色青銅
文件頁數: 3/4頁
文件大?。?/td> 283K
代理商: ID1014
M/A-COM Division of AMP Incorporated
I
North America: Tel. (800) 366-2266, Fax (800) 618-8883
I
Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087
I
Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V5.00
M/A-COM’s White Bronze
Environmental Test
Four groups of conditioning tests were performed to
provide a comprehensive evaluation of M/A-COM’s
White Bronze plated connector bodies. The tests were
performed to the specifications of the European
and International RF connector standards - CECC 22000/
IEC 68-2-14/IEC 169-1. Full details and relevant data
are available from M/A-COM and results are
summarized below.
Test 1 - Industrial Atmosphere & Temperature
Endurance
1.1 Industrial Atmosphere
Exposure to Sulphur Dioxide Atmosphere (as specified in
IEC 68-2-42 Test Kc) for 21 days of mated
connectors, previously subjected to 500 matings, to
determine the influence of sulphur dioxide on the
corrosion resistance properties of White Bronze Plating.
Contact resistance measured after matings and sulphur
dioxide exposure was less than 5% (0.23mohm) of the
permissible specification.
1.2 High Temperature Endurance
Exposure to temperatures of 85°C ±5°C for 250 hours, to
determine the impact of prolonged high temperatures on
plating adhesion. Prior to testing the connectors were
subject to 500 matings. Results showed no visual
deterioration in plating finish (blistering, cracking etc.)
and the results of outer conductivity performance were
comparable to Test 1 (above).
Test 2 - Rapid Temperature Change & Damp Heat
Steady State
2.1 Rapid Temperature Change
Exposure to -55°C and +85°C for 15 minutes,
transition time 2-3 minutes, 50 cycles. To determine
possible plating deterioration caused by prolonged and
rapid temperature change. No visual deterioration, outer
conductivity performance were comparable with Test 1
(above).
2.2 Damp Heat Steady State
Exposure to 93% relative humidity (at 40°C) for 10 days. To
determine plating adhesion. No visual deterioration, outer
conductivity performance were comparable with Test 1
(above).
Availability & Ordering
M/A-COM offers White Bronze on all products
including 7/16, N, TNC, SMAand OSP’s.
For more information on White Bronze contact your local
M/A-COM Sales Office.
Test 3 - Soldering Heat
3.1 Resistance to Soldering Heat
Exposure to concentrated soldering heat (250°C) for 10
seconds to evaluate any possible deterioration in
plating finish. No deterioration detected.
Test 4 - Salt Mist & Mechanical Endurance
4.1 Salt Mist
Exposure to salt mist spray (as defined in BS 2011 Pt. 2.1
Ka) for 48 hours to evaluate the uniformity of
protective coatings, any visual deterioration, or impact
on electrical performance. No visual deterioration,
outer conductivity performance were comparable with
Test 1 (above).
4.2 Mechanical Endurance
Electrical and visual evaluation of the connectors after
500 matings to determine any electrical or visual
deterioration. No visual deterioration, outer
conductivity performance were comparable with Test 1
(above).
Sucoplate
is a plating trademark for Huber & Suhner.
BBR is a plating trademark for Radiall.
相關PDF資料
PDF描述
ID1015 Cable Stripping Process for SSMT Surface Mount Connector Series
ID101 SCRs .5 Amp, Planar
ID101 MONOLITHIC DUAL PICO AMPERE DIODES
ID1018 Intermodulation in RF Coaxial Connectors
1018 Intermodulation in RF Coaxial Connectors
相關代理商/技術參數
參數描述
ID1015 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Cable Stripping Process for SSMT Surface Mount Connector Series
ID1016 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SSMT Next Generation Surface Mount
ID1018 制造商:M/A-COM Technology Solutions 功能描述:INTERMODULATION IN COAXIAL CONNECTORS APP. NOTE - Bulk
ID101H10N06F1 制造商:ITW Switches 功能描述:
ID101H20K06F1 制造商:ITW Switches 功能描述: