- 您現在的位置：買賣IC網 > PDF目錄10048 > IDT72805LB15PF8 (IDT, Integrated Device Technology Inc)IC FIFO SYNC DUAL 256X18 128TQFP PDF資料下載
參數資料
| 型號： | IDT72805LB15PF8 |
| 廠商： | IDT, Integrated Device Technology Inc |
| 文件頁數： | 3/26頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC FIFO SYNC DUAL 256X18 128TQFP |
| 標準包裝： | 1,000 |
| 系列： | 7200 |
| 功能： | 同步 |
| 存儲容量： | 4.6K（256 x 18） |
| 數據速率： | 67MHz |
| 訪問時間： | 15ns |
| 電源電壓： | 4.5 V ~ 5.5 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 128-LQFP |
| 供應商設備封裝： | 128-TQFP（14x20） |
| 包裝： | 帶卷 (TR) |
| 其它名稱： | 72805LB15PF8 |
第1頁第2頁當前第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁
11
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES
IDT72805LB/72815LB/72825LB/72835LB/72845LB CMOS Dual SyncFIFOTM
256 x 18, 512 x 18, 1,024 x 18, 2,048 x 18 and 4,096 x 18
JANUARY 13, 2009
When the
LD pin is LOW and WEN is HIGH, the WCLK input is disabled;
then a signal at this input can neither increment the write offset register
pointer, nor execute a write.
The contents of the offset registers can be read on the output lines when
the
LD pin is set LOW and REN is set LOW; then, data can be read on the
LOW-to-HIGH transition of the Read clock (RCLK). The act of reading the
control registers employs a dedicated read offset register pointer. (The read
and write pointers operate independently). Offset register content can be
read out in the IDT Standard mode only. It is inhibited in the FWFT mode.
A read and a write should not be performed simultaneously to the offset
registers.
FIRST LOAD (
FLA/FLB)
For the single device mode, see Table I for additional information. In the
Daisy Chain Depth Expansion configuration,
FLA/FLB is grounded to
indicate it is the first device loaded and is set to HIGH for all other devices
in the Daisy Chain. (See Operating Configurations for further details.)
WRITE EXPANSION INPUT (
WXIA/WXIB)
This is a dual purpose pin. For single device mode, see Table I for
additional information.
WXIA/WXIB is connected to Write Expansion Out
(
WXOA/WXOB) of the previous device in the Daisy Chain Depth Expansion
mode.
READ EXPANSION INPUT (
RXIA/RXIB)
This is a dual purpose pin. For single device mode, see Table I for
additional information.
RXIA/RXIB is connected to Read Expansion Out
(
RXOA/RXOB) of the previous device in the Daisy Chain Depth Expansion
mode.
OUTPUTS:
FULL FLAG/INPUT READY (
FFA/IRA, FFB/IRB)
This is a dual purpose pin. In IDT Standard mode, the Full Flag (
FFA/
FFB) function is selected. When the FIFO is full, FF will go LOW, inhibiting
further write operations. When
FF is HIGH, the FIFO is not full. If no reads
are performed after a reset,
FF will go LOW after D writes to the FIFO. D =
256 writes for the IDT72805LB, 512 for the IDT72815LB, 1,024 for the
IDT72825LB, 2,048 for the IDT72835LB and 4,096 for the IDT72845LB.
In FWFT mode, the Input Ready (
IRA/IRB) function is selected. IR goes
LOW when memory space is available for writing in data. When there is no
longer any free space left,
IR goes HIGH, inhibiting further write operations.
IR will go HIGH after D writes to the FIFO. D = 257 writes for the
IDT72805, 513 for the IDT72815, 1,025 for the IDT72825, 2,049 for the
IDT72835 and 4,097 for the IDT72845. Note that the additional word in
FWFT mode is due to the capacity of the memory plus output register.
FF/IR is synchronous and updated on the rising edge of WCLK.
EMPTY FLAG/OUTPUT READY (
EFA/ORA, EFB/ORB)
This is a dual purpose pin. In the IDT Standard mode, the Empty Flag
(
EFA/EFB) function is selected. When the FIFO is empty, EF will go LOW,
inhibiting further read operations. When
EF is HIGH, the FIFO is not empty.
In FWFT mode, the Output Ready (
ORA/ORB) function is selected. OR
goes LOW at the same time that the first word written to an empty FIFO
appears valid on the outputs.
OR stays LOW after the RCLK LOW to HIGH
transition that shifts the last word from the FIFO memory to the outputs.
OR
goes HIGH only with a true read (RCLK with
REN = LOW). The previous
data stays at the outputs, indicating the last word was read. Further data
reads are inhibited until
OR goes LOW again.
EF/OR is synchronous and updated on the rising edge of RCLK.
PROGRAMMABLE ALMOST-FULL FLAG (
PAFA/PAFB)
The Programmable Almost-Full flag (
PAFA/PAFB) will go LOW when
FIFO reaches the almost-full condition. In IDT Standard mode, if no reads
are performed after Reset (
RS), the PAF will go LOW after (256-m) writes for
the IDT72805LB, (512-m) writes for the IDT72815LB, (1,024-m) writes for
the IDT72825LB, (2,048–m) writes for the IDT72835LB and (4,096–m) writes
for the IDT72845LB. The offset “m” is defined in the Full Offset register.
In FWFT mode, if no reads are performed,
PAF will go LOW after (257-
m) writes for the IDT72805LB, (513-m) writes for the IDT72815LB, (1,025-
m) writes for the IDT72825LB, (2,049-m) writes for the IDT72835LB and
(4,097-m) writes for the IDT72845LB. The default values for m are noted in
Table 1 and 2.
If asynchronous
PAF configuration is selected, the PAF is asserted
LOW on the LOW-to-HIGH transition of the Write Clock (WCLK).
PAF is
reset to HIGH on the LOW-to-HIGH transition of the Read Clock (RCLK). If
synchronous
PAF configuration is selected (see Table I), the PAF is
updated on the rising edge of WCLK.
PROGRAMMABLE ALMOST-EMPTY FLAG (
PAEA/PAEB)
The
PAE flag will go LOW when the FIFO reads the almost-empty
condition. In IDT Standard mode,
PAE will go LOW when there are n words
or less in the FIFO. In FWFT mode, the
PAE will go LOW when there are
n+1 words or less in the FIFO. The offset “n” is defined as the Empty offset.
The default values for n are noted in Table 1 and 2.
If asynchronous
PAE configuration is selected, the PAE is asserted
LOW on the LOW-to-HIGH transition of the Read Clock (RCLK).
PAE is
reset to HIGH on the LOW-to-HIGH transition of the Write Clock (WCLK).
If synchronous
PAE configuration is selected (see Table I), the PAE is
updated on the rising edge of RCLK.
WRITE EXPANSION OUT/HALF-FULL FLAG
(
WXOA/HFA, WXOB/HFB)
This is a dual-purpose output. In the Single Device and Width Expansion
mode, when Write Expansion In (
WXIA/WXIB) and/or Read Expansion In
(
RXIA/RXIB) are grounded, this output acts as an indication of a half-full
memory.
After half of the memory is filled, and at the LOW-to-HIGH transition of
the next write cycle, the Half-Full flag goes LOW and will remain set until the
difference between the write pointer and read pointer is less than or equal
to one half of the total memory of the device. The Half-Full flag (
HFA/HFB)
is then reset to HIGH by the LOW-to-HIGH transition of the Read Clock
(RCLK). The
HF is asynchronous.
In the Daisy Chain Depth Expansion mode,
WXI is connected to WXO
of the previous device. This output acts as a signal to the next device in the
Daisy Chain by providing a pulse when the previous device writes to the last
location of memory.
READ EXPANSION OUT (
RXOA/RXOB)
In the Daisy Chain Depth Expansion configuration, Read Expansion In
(
RXIA/RXIB) is connected to Read Expansion Out (RXOA/RXOB) of the
previous device. This output acts as a signal to the next device in the Daisy
Chain by providing a pulse when the previous device reads from the last
location of memory.
DATA OUTPUTS (Q0-Q17, QB0-QB17)
Q0-Q17 are data outputs for 18-bit wide data.
相關PDF資料 |
PDF描述 |
|---|---|
| LT1134AISW | IC 4DRV/4RCV RS232 5V 24-SOIC |
| IDT72V241L15PFI | IC FIFO SYNC 4KX9 15NS 32QFP |
| AD9222ABCPZRL7-50 | IC ADC 12BIT SRL 50MSPS 64LFCSP |
| IDT72V241L10PFG | IC FIFO SYNC 4KX9 10NS 32QFP |
| LTC1349CG#PBF | IC TXRX 5V RS232 LOW PWR 28-SSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| IDT72805LB15PFI | 功能描述:IC FIFO SYNC DUAL 256X18 128TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72805LB15PFI8 | 功能描述:IC FIFO SYNC DUAL 256X18 128TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72805LB25BG | 功能描述:IC FIFO SYNC DUAL 256X18 121BGA RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72805LB25BG8 | 功能描述:IC FIFO SYNC DUAL 256X18 121BGA RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72805LB25PF | 功能描述:IC FIFO SYNC DUAL 256X18 128TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
發布緊急采購，3分鐘左右您將得到回復。