參數資料
型號: IDT82V2084PF
廠商: IDT, Integrated Device Technology Inc
文件頁數: 25/75頁
文件大小: 0K
描述: IC LIU T1/J1/E1 4CH 128-TQFP
標準包裝: 15
類型: 線路接口裝置(LIU)
規程: E1
電源電壓: 3.13 V ~ 3.47 V
安裝類型: 表面貼裝
封裝/外殼: 128-LQFP
供應商設備封裝: 128-TQFP(14x20)
包裝: 托盤
其它名稱: 82V2084PF
31
INDUSTRIAL
TEMPERATURE RANGES
QUAD CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
3.10 MCLK AND TCLK
3.10.1 MASTER CLOCK (MCLK)
MCLK is an independent, free-running reference clock. MCLK is 1.544
MHz or 37.056 MHz for T1/J1 applications and 2.048 MHz or 49.152 MHz
in E1 mode. This reference clock is used to generate several internal ref-
erence signals:
Timing reference for the integrated clock recovery unit.
Timing reference for the integrated digital jitter attenuator.
Timing reference for microcontroller interface.
Generation of RCLK signal during a loss of signal condition if AIS is
enabled.
Reference clock during a blue alarm Transmit All Ones (TAOS), all
zeros, PRBS/QRSS and inband loopback patterns if it is selected
as the reference clock. For ATAO and AIS, MCLK is always used as
the reference clock.
Figure-19 shows the chip operation status in different conditions of
MCLK and TCLKn. The missing of MCLK will set all the four TTIP/TRING
to high impedance state.
3.10.2 TRANSMIT CLOCK (TCLK)
The TCLKn is used to sample the transmit data on TDn/TDPn, TDNn.
The active edge of TCLKn can be selected by the TCLK_SEL bit (TCF0,
02H...). During Transmit All Ones, PRBS/QRSS patterns or Inband Loop-
back Code,either TCLKnor MCLK can beused as the referenceclock. This
is selected by the PATT_CLK bit (MAINT0, 0AH...).
But for Automatic Transmit All Ones and AIS, only MCLK is used as the
reference clock and the PATT_CLK bit is ignored. In Automatic Transmit
All Ones condition, the ATAO bit (MAINT0, 0AH) is set to ‘1’. In AIS condi-
tion, the AISE bit (MAINT0, 0AH) is set to ‘1’.
If TCLKn has been missing for more than 70 MCLK cycles, TCLK_LOS
bit (STAT0, 14H...) will be set, and the corresponding TTIPn/TRINGn will
become high impedance if this channel is not used for remote loopback or
isnotusingMCLK totransmitinternal patterns (TAOS,AllZeros,PRBSand
in-band loopback code). When TCLKn is detected again, TCLK_LOS bit
(STAT0,14H...)willbecleared.ThereferencefrequencytodetectaTCLKn
loss is derived from MCLK.
Figure-19 TCLK Operation Flowchart
normal operation mode
transmitter n enters high
impedance status and
generates transmit clock loss
interrupt if not masked
TCLKn status?
clocked
L/H
MCLK=H/L?
all transmitters high
impedance status
yes
clocked
相關PDF資料
PDF描述
IDT82P2284BBG8 TXRX T1/J1/E1 4CHAN 208-PBGA
IDT72V273L10PF8 IC FIFO 16384X18 10NS 80QFP
MAX11619EEE+T IC ADC 10BIT 4CH 16QSOP
IDT82P2284BB8 TXRX T1/J1/E1 4CHAN 208-PBGA
MS27473T12B35SB CONN PLUG 22POS STRAIGHT W/SCKT
相關代理商/技術參數
參數描述
IDT82V2084PF8 功能描述:IC LIU T1/J1/E1 4CH 128-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2084PFG 功能描述:IC LIU T1/J1/E1 4CH 128-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2084PFG8 功能描述:IC LINE INTERFC UNIT 4CH 128TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2088 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:OCTAL CHANNEL T1/E1/J1 LONG HAUL/ SHORT HAUL LINE INTERFACE UNIT
IDT82V2088_08 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:OCTAL CHANNEL T1/E1/J1 LONG HAUL/ SHORT HAUL LINE INTERFACE UNIT