![](http://datasheet.mmic.net.cn/230000/IP175_datasheet_15586134/IP175_22.png)
IP175
EEPROM Register Description
(continued)
Offset
Default Value Corresponding Pin
Transceiver verification register
05H[15:14]
2’b0
05H[13]
0
05H[12]
0
Preliminary, Specification subject to change without notice
IP175-DS-P05
Jul. 19, 2002
22
Description
-
-
Reserved
The default value must be adopted for normal operation.
UPDATE_R4_EN, Change capability enable
A full duplex port will change its capability to half duplex, if the
remote full duplex port does not support 802.3x and this function
is enable.
1: enable
0: disable
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
BYSCR_MODE, Bypass scrambler
1: bypass
0: not bypass
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
UPDATE_R4_EN
(LED_FULL[0])
05H[11]
05H[10]
05H[9]
05H[8]
05H[7:6]
05H[5]
05H[4]
05H[3]
05H[2]
05H[1]
0
0
0
0
00
0
0
0
0
0
-
-
-
-
-
-
-
-
-
BPSCR
(LED_LINK[4])
05H[0]
Testing & verify mode register
06H[15:7]
06H[6]
06H[5:0]
07H[15:14]
07H[13:10]
07H[7:0]
0
-
9’b0
0
6’b0
2’b0
4’b0
8’h77
-
-
-
-
-
-
Reserved
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
The default value must be adopted for normal operation.
Reserved
MAX_USE_THR, Input queue threshold
An incoming packet will be dropped if the number of packet
queued in a port is over the input queue threshold. This function
is always active in spite of if there is flow control or not. It is
usually higher than the threshold for flow control.
It is recommended to adopt the default value.
Reserved
BCKP_THR_RLS, Backpressure off threshold
Reserved
BCKP_THR, Backpressure on threshold
Reserved
X802_3_THR_RLS, 802.3x off threshold
Reserved
X802_3_THR, 802.3x on threshold
08H[15]
08H[14:8]
08H[7]
08H[6:0]
09H[15]
09H[14:8]
09H[7]
09H[6:0]
0
-
-
-
-
-
-
-
-
7’h30
0
7’h60
0
7’h30
0
7’h50