![](http://datasheet.mmic.net.cn/330000/IS22C012_datasheet_16418701/IS22C012_1.png)
This specification contains ADVANCE INFORMATION data. ISSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best
possible product. We assume no responsibility for any errors which may appear in this publication. Copyright 1999, Integrated Silicon Solution, Inc.
IS22C012
VERSATILE 10 SEC INSTANT
VOICE ROM
ADVANCE INFORMATION
FEBRUARY 1999
GENERAL DESCRIPTION
IS22C012 is a high quality voice synthesizer capable of
varying playback duration. A proprietary ADPCM algorithm
is used. The audio message is stored in a 256K bits on-
chip EPROM which can store up to ten seconds of voice
data at 6 KHz sample rate.
The IS22C012 eliminates the need of complicated circuitry
in voice playback but still achieves high voice quality.
Sounds such as human speech, animal sounds, musical
sounds and even special sound effects can be synthesized.
Versatile combinations in sections achieve longer playback
duration. In addition, devices can be cascaded to achieve
longer voice duration. Two devices can be configured in
parallel in order to achieve signal mixing without an external
mixer in which speech can be mixed with background
music each from one of two different chips.
The IS22C012 provides wide operating voltage range
from 2.4V to 6.0V. PWM digital amplifier output pins, V
OUT
1
and V
OUT
2
provides direct drive to buzzer or speaker.
A current output pin, C
OUT
, enables the device to drive a
speaker through a low cost NPN transistor. No complex
filtering or amplifier circuit is needed. An automatic ramp-
down function eliminates undesired noise at the end of
playback.
FEATURES
Minimum 10 second voice length at 6 KHz
Versatile features for playback
Combination of voice building blocks
extends the duration of playback
Voice data re-use saves memory space
Four trigger pins, S1 to S4 for eight groups
SBT for sequential play-all
Holdable and unholdable, edge and level
triggering option
15 ms debounce time suitable for CDS
IRP interrupt pin for master reset
Three programmable output pins for STP Stop
Pulse, BUSY Signal, and LED
Built-in oscillator with variable sample rate
Single external resistor to determine sample rate
Built-in D/A converter, EPROM
ADPCM data compression provides high sound
quality
Optional pop noise elimination function
C
OUT
pin drives speaker with a transistor
V
OUT
1
and V
OUT
2
drives buzzer or speaker
directly
Auto-power down
2.4V-6V single power supply operation
Low standby current (<5
μ
A at 3V)
Development tools support
Group of sections
The voice data memory area of the IS22C012 can be
subdivided into 124 sections. Any combination of these
sections will form an individual group for data playback. A
maximum of eight groups are available with activation
controlled by S1 to S4 pins. The SBT pin can be used to
trigger multiple groups playback in sequence.
Group Configuration
Voice within each group are combinations of different fixed
memory sections of up to 124 sections. These sections are
the fundamental voice building blocks for arranging
playback without limiting sequencing. This provides
flexibility and allows data to be re-used, beneficial for
applications with many repeated sounds or words.
An example of group configuration is illustrated below:
Group No.
Section Entry
Group 1
Sec 1 + Sec 2 + Sec 3 ……. Sec 109
Group 2
Sec 3 + Sec 2
Group 3
Sec 10 + Sec 11 + Sec 12
Group 4
Sec110 + Sec 10 + Sec 5
ISSI
Integrated Silicon Solution, Inc. — 1-800-379-4774
ADVANCE INFORMATION
VP010-0B
02/24/99
1