參數資料
型號： IS61LF102418A-7.5B2I
廠商： INTEGRATED SILICON SOLUTION INC
元件分類： DRAM
英文描述： 256K x 72, 512K x 36, 1024K x 18 18Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
中文描述： 1M X 18 CACHE SRAM, 7.5 ns, PBGA119
封裝： 14 X 22 MM, PLASTIC, BGA-119
文件頁數： 21/35頁
文件大?。?/td> 281K
代理商： IS61LF102418A-7.5B2I
Integrated Silicon Solution, Inc. — 1-800-379-4774
Rev. E
04/21/06
21
ISSI
IS61LF25672A IS61LF51236A IS61LF102418A
IS61VF25672A IS61VF51236A IS61VF102418A
IEEE 1149.1 SERIAL BOUNDARY SCAN (JTAG)
The IS61LF/VF51236A and IS61LF/VF102418A have a
serial boundary scan Test Access Port (TAP) in the PBGA
package only. This port operates in accordance with
IEEE
Standard 1149.1-1900, but does not include all functions
required for full 1149.1 compliance. These functions from
the
IEEE specification
are excluded because they place
added delay in the critical speed path of the SRAM. The
TAP controller operates in a manner that does not conflict
with the performance of other devices using 1149.1 fully
compliant TAPs. The TAP operates using JEDEC stan-
dard 2.5V I/O logic levels.
DISABLING THE JTAG FEATURE
The SRAM can operate without using the JTAG feature.
To disable the TAP controller, TCK must be tied LOW
(Vss) to prevent clocking of the device. TDI and TMS are
internally pulled up and may be disconnected. They may
alternately be connected to V
DD
through a pull-up resistor.
TDO should be left disconnected. On power-up, the de-
vice will start in a reset state which will not interfere with the
device operation.
TEST ACCESS PORT (TAP) - TEST CLOCK
The test clock is only used with the TAP controller. All
inputs are captured on the rising edge of TCK and outputs
are driven from the falling edge of TCK.
TEST MODE SELECT (TMS)
The TMS input is used to send commands to the TAP
controller and is sampled on the rising edge of TCK. This
pin may be left disconnected if the TAP is not used. The pin
is internally pulled up, resulting in a logic HIGH level.
TEST DATA-IN (TDI)
The TDI pin is used to serially input information to the
registers and can be connected to the input of any register.
The register between TDI and TDO is chosen by the
instruction loaded into the TAP instruction register. For
information on instruction register loading, see the TAP
Controller State Diagram. TDI is internally pulled up and
can be disconnected if the TAP is unused in an application.
TDI is connected to the Most Significant Bit (MSB) on any
register.
31 30 2
9
. . .
Identification Register
2
1
0
2
1
0
0
x
. . . . .
Boundary Scan
Register*
2
1
0
Bypass Register
Instruction Register
TAP CONTROLLER
Selection Circuitry
Selection Circuitry
TDO
TDI
TCK
TMS
TAP CONTROLLER BLOCK DIAGRAM
相關PDF資料
PDF描述
IS61LF102418A-7.5B3 256K x 72, 512K x 36, 1024K x 18 18Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102418A-7.5B3I 256K x 72, 512K x 36, 1024K x 18 18Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102418A-7.5TQ 256K x 72, 512K x 36, 1024K x 18 18Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102418A-7.5TQI 256K x 72, 512K x 36, 1024K x 18 18Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102418A-7.5TQLI 256K x 72, 512K x 36, 1024K x 18 18Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
相關代理商/技術參數
參數描述
IS61LF102418B-7.5TQLI 功能描述:IC SRAM 18MBIT 7.5NS 100TQFP 制造商:issi, integrated silicon solution inc 系列:- 包裝:托盤 零件狀態:有效 格式 - 存儲器:RAM 存儲器類型:SRAM - 同步 存儲容量:18M（1M x 18） 速度:7.5ns 接口:并聯 電壓 - 電源:3.135 V ~ 3.465 V 工作溫度:-40°C ~ 85°C（TA） 封裝/外殼:100-LQFP 供應商器件封裝:100-LQFP（14x20） 標準包裝:72
IS61LF102436A 制造商:ISSI 制造商全稱:Integrated Silicon Solution, Inc 功能描述:36Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102436A-6.5B3 制造商:ISSI 制造商全稱:Integrated Silicon Solution, Inc 功能描述:36Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102436A-6.5B3I 制造商:ISSI 制造商全稱:Integrated Silicon Solution, Inc 功能描述:36Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
IS61LF102436A-6.5TQL 制造商:ISSI 制造商全稱:Integrated Silicon Solution, Inc 功能描述:36Mb SYNCHRONOUS FLOW-THROUGH STATIC RAM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*