2
FN6162.2
October 10, 2007
Absolute Maximum Ratings (TA = 25°C)
Thermal Information
Supply Voltage (V+ to V-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . V- -0.5V, V+ +0.5V
Supply Turn-on Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . 1V/
μs
IN- Input Current (Note
1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA
Digital & Analog Input Current (Note
1) . . . . . . . . . . . . . . . . . . 50mA
Output Current (Continuous) . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300V
Storage Temperature Range . . . . . . . . . . . . . . . . . . -65°C to +150°C
Ambient Operating Temperature . . . . . . . . . . . . . . . . -40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . . -40°C to +125°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See Curves
θJA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See Curves
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. If an input signal is applied before the supplies are powered up, the input current must be limited to these maximum values.
2. Parts are 100% tested at +25°C. Over temperature limits established by characterization and are not production tested.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications
V+ = +5V, V- = -5V, GND = 0V, TA = +25°C, RL = 500Ω to GND unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
GENERAL
±IS Enabled
Supply Current
No load, VIN = 0V, ENABLE Low
12.5
14.5
16.5
mA
IS Disabled
Disabled Supply Current I+
No load, VIN = 0V, ENABLE High
0.5
1
1.5
mA
Disabled Supply Current I-
No load, VIN = 0V, ENABLE High
3
10
μA
VOUT
Positive and Negative Output Swing
VIN = ±2V, RL = 500Ω, AV = 2
±3.5
±3.9
V
IOUT
Output Current
RL = 10Ω to GND
80
130
mA
VOS
Output Offset Voltage
-12
4
+12
mV
Ib+
Input Bias Current
VIN = 0V
-4
2.5
-1.5
μA
Ib-
Feedback Bias Current
-15
7
15
μA
ROUT
Output Resistance
HIZ = logic high, (DC), AV =1
1.4
M
Ω
HIZ = logic low, (DC), AV =1
0.2
Ω
RIN
Input Resistance
VIN = 3.5V
10
M
Ω
CIN
Input Capacitance
VIN = 224mVRMS, AV = 1
0.9
pF
ACL or AV
Voltage Gain
RF = RG = 500Ω, VOUT = ±3V
1.990
2.005
2.020
V/V
ITRI
Output Current in Three-state
VOUT = 0V
-20
6
20
μA
LOGIC
VH
Input High Voltage (Logic Inputs)
2
V
VL
Input Low Voltage (Logic Inputs)
0.8
V
IIH
Input High Current (Logic Inputs)
55
90
135
μA
IIL
Input Low Current (Logic Inputs)
-10
0
10
μA
AC GENERAL
- 3dB BW
-3dB Bandwidth
AV = 1, RF = 332Ω, VOUT = 200mVP-P,
CL = 1.6pF, CG = 0.6pF
400
MHz
AV = 2, RF = RG = 511Ω, VOUT = 2VP-P,
CL = 5.5pF, CG = 0.6pF
200
MHz
ISL59440