- 您現在的位置：買賣IC網 > PDF目錄383181 > ISL90460UIH527Z-TK (INTERSIL CORP) Digitally Controlled Potentiometer (XD PDF資料下載
參數資料
| 型號： | ISL90460UIH527Z-TK |
| 廠商： | INTERSIL CORP |
| 元件分類： | 數字電位計 |
| 英文描述： | Digitally Controlled Potentiometer (XD |
| 中文描述： | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 32 POSITIONS, PDSO6 |
| 封裝： | ROHS COMPLIANT, PLASTIC, SOT-23, MO-178-AB, 6 PIN |
| 文件頁數： | 5/7頁 |
| 文件大?。?/td> | 207K |
| 代理商： | ISL90460UIH527Z-TK |
5
FN8225.3
FN8225.2
June 6, 2005
October 7, 2005
Pin Descriptions
RH
The ISL90460 contains a digital potentiometer connected as
a rheostat or variable resistor. The wiper and one terminal of
the digital potentiometer is tied to the RH pin, and the other
terminal of the potentiometer is tied to the ground pin (GND).
The resistance from the RH pin to ground will vary with the
potentiometer setting; at the highest setting, the resistance
will be the maximum (Rtot), at the lowest setting it will be a
minimum.
Up/Down (U/D)
The U/D input controls the direction of the wiper movement
and whether the counter is incremented or decremented.
Chip Select (CS)
The device is selected when the CS input is LOW. The
current counter value is stored in volatile memory when CS
is returned HIGH. When CS is high, the device is placed in
low power standby mode.
Principles of Operation
There are two sections of the ISL90460: the input control,
counter and decode section; and the resistor array. The input
control section operates just like an up/down counter. The
output of this counter is decoded to turn on a single
electronic switch connecting a point on the resistor array to
the wiper output. The resistor array is comprised of 31
individual resistors connected in series. At either end of the
array and between each resistor is an electronic switch that
transfers the connection at that point to the wiper. The wiper
is connected to the RH terminal, forming a variable resistor
from RH to GND.
The direction of the wiper movement is defined when the
device is selected. If during CS transition from High to Low
the U/D input is LOW, the wiper will move down on each
rising edge of U/D toggling. Similarly, the wiper will move up
on each rising edge of U/D toggling if, during CS transition
from High to Low, the U/D input is High.
The wiper, when at either fixed terminal, acts like its
mechanical equivalent and does not move beyond the last
position. That is, the counter does not wrap around when
clocked to either extreme.
If the wiper is moved several positions, multiple taps are
connected to the wiper for t
SETTLE
(U/D to RH change). The
2-terminal resistance value for the device can temporarily
change by a significant amount if the wiper is moved several
positions.
CS
U/D
RH
t
CU
t
CI
t
IL
t
IH
t
IC
t
SETTLE
FIGURE 2. SERIAL INTERFACE TIMING DIAGRAM, DECREMENT
ISL90460
相關PDF資料 |
PDF描述 |
|---|---|
| ISL90460WIH527Z-TK | Digitally Controlled Potentiometer (XD |
| ISL90460WIE527Z-TK | Digitally Controlled Potentiometer (XD |
| ISL90460WIE527-TK | Digitally Controlled Potentiometer (XD |
| ISL90460UIE527-TK | Digitally Controlled Potentiometer (XD |
| ISL90460TIH527-TK | Digitally Controlled Potentiometer (XD |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ISL90460WIE527-TK | 功能描述:IC XDCP 32-TAP 10KOHMS SC70-5 RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| ISL90460WIE527Z-TK | 功能描述:IC XDCP 32-TAP 10KOHMS SC70-5 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:3,000 系列:DPP 接片:32 電阻（歐姆）:10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN（2x3） 包裝:帶卷 (TR) |
| ISL90460WIH527-TK | 功能描述:IC XDCP 32-TAP 10KOHMS SOT23-5 RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| ISL90460WIH527Z-TK | 功能描述:IC XDCP 32-TAP 10KOHMS SOT23-5 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:3,000 系列:DPP 接片:32 電阻（歐姆）:10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN（2x3） 包裝:帶卷 (TR) |
| ISL90461 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Single Volatile 32-Tap XDCP |
發布緊急采購，3分鐘左右您將得到回復。