參數資料
型號: JANTX2N2060
英文描述: TRANSISTOR | BJT | PAIR | NPN | 60V V(BR)CEO | 500MA I(C) | TO-77
中文描述: 晶體管|晶體管|一對|叩| 60V的五(巴西)總裁| 500mA的一(c)|至77
文件頁數: 3/21頁
文件大?。?/td> 137K
代理商: JANTX2N2060
MIL-PRF-19500/368F
11
4.4.2.2 Group B inspection, (JAN, JANTX, and JANTXV). Separate samples may be used for each step. In the
event of a group B failure, the manufacturer may pull a new sample at double size from either the failed assembly lot
or from another assembly lot from the same wafer lot. If the new “assembly lot” option is exercised, the failed
assembly lot shall be scrapped.
Step
Method
Condition
1
1039
Steady-state life: Test condition B, 340 hours, VCB = 10 - 30 V dc, power shall be applied to
achieve TJ = +150
°C minimum using a minimum of PD = 75 percent of maximum rated PT as
defined in 1.3. n = 45 devices, c = 0.
2
1039
The steady-state life test of step 1 shall be extended to 1,000 hours for each die design.
Samples shall be selected from a wafer lot every twelve months of wafer production, however,
group B, step 2 shall not be required more than once for any single wafer lot. n = 45, c = 0.
3
1032
High-temperature life (non-operating), t = 340 hours, TA = +200°C. n = 22, c = 0.
4.4.2.3 Group B sample selection. Samples selected from group B inspection shall meet all of the following
requirements:
a.
For JAN, JANTX, and JANTXV samples shall be selected randomly from a minimum of three wafers (or
from each wafer in the lot) from each wafer lot. For JANS, samples shall be selected from each inspection
lot. See MIL-PRF-19500.
b.
Must be chosen from an inspection lot that has been submitted to and passed table I, group A, subgroup 2,
conformance inspection. When the final lead finish is solder or any plating prone to oxidation at high
temperature, the samples for life test (subgroups B4 and B5 for JANS, and group B for JAN, JANTX, and
JANTXV) may be pulled prior to the application of final lead finish.
4.4.3 Group C inspection, Group C inspection shall be conducted in accordance with the tests and conditions
specified for subgroup testing in table VII of MIL-PRF-19500, and in 4.4.3.1 (JANS) and 4.4.3.2 (JAN, JANTX, and
JANTXV) herein for group C testing. Electrical measurements (end-points) and delta requirements shall be in
accordance with table I, group A, subgroup 2 and 4.5.3 herein.
4.4.3.1 Group C inspection, table VII (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E, except the UA package.
C6
1026
1,000 hours at VCB = 10 V dc; power shall be applied to achieve
TJ = +150
°C minimum and a minimum of PD = 75 percent of maximum
rated PT as defined in 1.3.
* 4.4.3.2 Group C inspection, table VII (JAN, JANTX, and JANTXV) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E.
C5
3131
See 4.5.2.
C6
Not applicable.
4.4.3.3 Group C sample selection. Samples for subgroups in group C shall be chosen at random from any lot
containing the intended package type and lead finish procured to the same specification which is submitted to and
passes group A tests for conformance inspection. Testing of a subgroup using a single device type enclosed in the
intended package type shall be considered as complying with the requirements for that subgroup.
相關PDF資料
PDF描述
JANTX2N2060L TRANSISTOR | BJT | PAIR | NPN | 60V V(BR)CEO | 500MA I(C) | TO-77
JANTX2N2221A TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | TO-18
JANTX2N2221AL TRANSISTOR | BJT | NPN | 50V V(BR)CEO | 800MA I(C) | TO-206AA
JANTX2N2221AUA TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | SMT
JANTX2N2221AUB TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | CHIP
相關代理商/技術參數
參數描述
JANTX2N2060L 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 60V 0.5A 6PIN TO-78 - Bulk
JANTX2N2150 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR - Bulk
JANTX2N2151 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR - Bulk
JANTX2N2218 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 30V 0.8A 3PIN TO-39 - Bulk
JANTX2N2218A 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 50V 0.8A 3PIN TO-39 - Bulk